LG LP0820WSR Owner's Manual page 18

OPERATION
18
Temperature Control ∧/∨
3
In Cool, Dry and Heat mode, the ∧/∨
buttons adjust the set temperature up to
86 °F (30 °C) or down to 60 °F (16 °C), in
one-degree increments.
NOTE
• To switch the temperature units on the
display between Fahrenheit (°F) and
Celsius (°C), press and hold the ∧ and
∨ buttons on the control panel at the
same time for 5 seconds.
Fan Speed
4
Press repeatedly to toggle the fan speed
between High and Low settings. An LED
illuminates to indicate the selected fan
speed. The fan speed can be changed in
the Cool, Fan, and Heat modes. The fan
speed is preset in the Dry mode. After
pressing the button, there is a brief delay
before the fan motor changes speed.
NOTE
• Press and hold the Fan Speed button on
the control panel for 3 seconds to set
Auto Swing.
Timer
5
Delay ON - When the air conditioner is off,
set it to automatically turn on from 1 to 24
hours later, at its previous mode and fan
settings.
Delay OFF - When the air conditioner is
on, set it to automatically turn off from 1 to
24 hours later.
NOTE
• Each press of the Timer button advances
the timer by 1 hour. Once you have
finished setting the Delay OFF Timer, the
display returns to the temperature setting
after a short delay.
• To cancel the Timer function, press the
Timer button on control panel.
Auto Swing
6
This function automatically moves the
louvers to adjust the direction of the air
flow. Press the Auto Swing button
repeatedly to select the desired direction.
NOTE
• To switch the temperature units on the
display between Fahrenheit (°F) and
Celsius (°C), press and hold the Swing
button on the remote control for 5
seconds.
Light
7
Sets the display screen brightness:
On → Dim → Off
NOTE
• Press and hold the Timer button on the
control panel for 3 seconds to adjust the
brightness.
Clean Filter
8
The Clean Filter LED lights up to notify
you that the filter needs to be cleaned.
After cleaning the filter, press and hold the
Mode button on the control panel for 3
seconds to turn off the Clean Filter light.
NOTE
• The filter reset must be done using the
control panel, not the remote control.
• This feature is a reminder to clean the air
filter for more efficient operation. The
LED light turns on after 250 hours of
operation.