Advertisement
Available languages
Available languages
Energy Supply
• To insert the batteries, remove both side
safety-catches and remove the rear bat-
tery compartment. Do not mix old batte-
ries with new ones.
• Place 8 x 1.5 V LR6 / AA batteries into
the upper battery compartment.
Make sure that the polarity of the battery
matches the compartment symbol.
• Close the battery compartment lid until you hear it click into place.
• If you want to use the unit with a mains adapter (not included in delivery), open
the O-ring seal on the underside of the camera and insert the mains adapter plug.
The mains adapter must have a DC voltage of 6V with 680 mA. The pin in the mains
adapter is the positive pole. Using the mains adapter is also possible when batteries
are inserted. If the power supply is interrupted, operation will continue via battery.
11
Advertisement
