Table of Contents
Advertisement
How to use your Ignite TV Voice Remote: Program & pair
BEFORE YOU START:
•
Find out which of these Ignite TV
XR11 Voice Remote
•
Power on. Turn on your TV and/or audio device.
•
Check your batteries. Press any button on the voice remote until the LED light turns either
red or green. If the LED does not light up, replace your batteries.
LED on XR11
•
Check Voice Commands Press the Mic button on the Voice Remote and say, "Help".
voice remotes you own:
TM
XR15 Voice Remote
LED on XR15
Advertisement
Table of Contents
Related Manuals for Rogers Ignite TV XR11
Summary of Contents for Rogers Ignite TV XR11
- Page 1 How to use your Ignite TV Voice Remote: Program & pair BEFORE YOU START: • Find out which of these Ignite TV voice remotes you own: XR11 Voice Remote XR15 Voice Remote • Power on. Turn on your TV and/or audio device. •...
- Page 2 Remote until the LED at the top changes from red to green. • Press the Rogers The LED will begin flashing green and the TV screen will prompt you to enter a provided 3- digit code. This may take a few moments to display on your TV.
- Page 3 VOICE REMOTE STEPS • Press and hold the Rogers and Info (i) buttons at the same time for 5 seconds. Wait for the remote light to change from red to green. • Follow the instructions by entering the 3-digit, on-screen pairing code.
- Page 4 Program your Voice Remote to work with your TV Turn your TV on or off, and control your TV’s volume using the voice remote. Here’s how to set it Program or pair your remote with your TV to control the power and volume. 1.
- Page 5 VOICE REMOTE STEPS • Press and hold the A and D buttons at the same time until the LED at the top changes from red to green. • Enter 9-9-1. The LED button will flash green twice. • Press the CH+ button slowly multiple times until the TV turns off.
Need help?
Do you have a question about the Ignite TV XR11 and is the answer not in the manual?
Questions and answers
When I use my Rogers XR11 remote to start the TV, the LG programming guide appears. How can I delete the LG programming so that I go directly to the Rogers programming guide? Thank you.Ii
To access the Rogers programming guide instead of the LG programming guide using the XR11 remote, you need to pair the XR11 remote with the Rogers Xfinity Entertainment box. To do this:
1. Press and hold the Setup button until the remote light turns green.
2. Enter the 3-digit code shown on your TV screen.
3. When prompted with “Would you like to control your TV using your remote?”, select “Not now”.
Once paired, use the Rogers XR11 remote to access the Rogers guide. This should bypass the LG guide.
This answer is automatically generated
Disable advanced features on xr11 remote. Is there a simple remote for seniors? Want to avoid accidentally recording or bringing up screen pop ups.