Media Panel - ION POWER GLOW 200 Quick Start Manual

Media Panel

Use the following buttons on the Media Panel to control the USB/SD, FM Radio, and Bluetooth audio
sources.
MODE
Mode: Press this button to switch the audio source between USB/SD, FM radio, and
Bluetooth. The default mode when powering on Power Glow 200 is Bluetooth. The USB/SD
mode is only selectable if a USB drive or SD card is plugged into Power Glow 200;
otherwise, the Mode button will toggle between Bluetooth and FM radio only.
Note: Your USB drive or SD card cannot be more than 16 GB and it must contain
playable files in order for its data to appear properly in the Display. It can have MP3,
WAV, FLAC, or APE files. When you connect a USB drive or SD card with playable files,
Power Glow 200 will order the files alphabetically by folder on the root directory and then
by track name in the folder.
When FM Radio is selected as the audio source, press and hold the Mode button in
order to access your preset radio stations. See
When USB/SD, FM Radio, or Bluetooth is selected as the audio source, double-press
this button cycle through the digital EQ presets.
Play/Pause: When USB/SD is selected as the audio source, press this button to
play/pause the currently selected track or press and hold this button to cycle through the
five repeat/shuffle options: 1) play the USB/SD folder's tracks in order with repeat/shuffle
off (OFF), 2) play the tracks in random order (Rd0), 3) play the current USB/SD track on
repeat (ONE), 4) play all the tracks on the USB drive or SD card on repeat (ALL), and 5)
play the current folder's tracklist on repeat (F0d).
When Bluetooth is selected as the audio source, press this button to play/pause the
currently selected track or press and hold this button to disconnect the currently paired
Bluetooth device.
When FM radio is selected as the audio source, press and hold this button to save the
currently selected radio station as a preset. See
If you have turned off the Media Panel with the remote control, you can double-press this
button to turn the Media Panel back on.
VOL-
Previous / Vol-: When USB/SD or Bluetooth is selected as the audio source, press this
button to go to the previous track in the playlist or press and hold this button to lower the
volume of the audio source.
When listening to the FM radio, press this button to decrease the radio frequency or
press and hold this button to seek backward.
VOL+
Next / Vol+: When USB/SD or Bluetooth is selected as the audio source, press this
button to go to the next track in the playlist or press and hold this button to increase the
volume of the audio source.
When listening to the FM radio, press this button to increase the radio frequency or press
and hold this button to seek forward.
Note: In some apps on Bluetooth devices, pressing the
change the playlist or music genre rather than the track.
Using the Radio for more information.
Using the Radio for more information.
(Previous) or (Next) buttons may
7