Safety Notes - YeeSite 8LEDs x 3-Watts UV Bar User Manual

accurate in all respects. However, YeeSite assumes no responsibility
and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this
document, whether such errors or omissions result from negligence,
accident or any other cause. YeeSite reserves the right to revise the
content of this document without any obligation to notify any person
or company of such revision, however, YeeSite has no obligation to
make, and does not commit to make, any such revisions.

Safety Notes:

Please read the following Safety Notes carefully before working with
the product. Than Notes include important safety information about
installation, usage and maintenance.
Always connect the product to a grounded circuit to avoid the
risk of electrocution.
Always disconnect the product from the power source before
cleaning or replacing the fuse.
Avoid direct eye exposure to the light source while the product
is on.
Make sure the power cord is not crimped or damaged.
Never disconnect the product from power cord by pulling or
tugging on the cord.
If mounting the product overhead, always secure to a fastening
device using a safety cable.
Make sure there are no flammable materials close to the product
when operating.
Do not touch the product's housing when operating because it
may be very hot.
Always make sure that the voltage of the outlet to which you're
connecting the product is within the range stated on the decal or
rear panel of the product.
The product is for indoor use only (IP20) To prevent risk of fire
or shock, do not expose the product to rain or moisture.
!
-2-