Program Setting; Programming Single Days - Duramaxx 10027579 User Manual

1 Press the PROG button for 3 seconds to to activate the Program Mode.
2 In the beginning, should choose which Unit number of Actuator to be programmed. Press UNIT to
set. Unit "A" for all the unit.
3 First is the program Mode setting. Press SELECT button to select. Press PROG to the next step.
• 7 days programs of a week is diff erent. The "7" appears at the bottom of the display.
• Programs for Weekdays and Weekend. The "5 2" appears at the bottom of the display.
• Programs for Weekdays, Saturday and Sunday. The "5 1 1" appears at the bottom of the display.
• Daily Programs for 7 days of week are the same. The "dAY" appears at the bottom of the display.
4 Then select day for Program Setting. Press SELECT button to select. For example, select Monday
for the fi rst day program of 7 days program mode. Press PROG to the next step.
1 Press the PROG button for 3 seconds to to activate the Program Mode.
2 In the beginning, should choose which Unit number of Actuator to be programmed. Press UNIT to
set. Unit "A" for all the unit.
3 First is the program Mode setting. Press SELECT button to select „dAY".
4 The program setting is from 0:00 of the day.
5 Use TEMP button to select any one of below 5 status for each hour program. Comfort (shown two
dots), Semi-Comfort (shown one dot), Economic (no dot) Anti-Frozen (no dot) or Off (no dot).
6 Turn the setting dial to go forward or backward hour for setting. The select hour program will keep
the same until use TEMP button to select other setting.
7 Press PROG to fi nish this day program setting and back to above procedure to select next day
program for setting.
8 For a new day program setting, you can use Copy feature to set this day program same as the
one just set.
9 At the beginning of a day program setting, press HOLD button. The COPY symbol fl ash on the dis-
play. Press OK button for confi rm it. And back to above procedure to select next day program for
setting.
10 Repeat procedure B and C to fi nish all the day program setting.
11 Press OK button to save quit this setting.
11

Program Setting

Programming single Days