Huawei MediaPad M6 User Manual page 17

If the external display supports Miracast, enable wireless projection on it.
•
If not, use a wireless HDMI adapter to connect your tablet and external display. Ensure
•
that the wireless HDMI adapter is connected to a power supply.
To check whether your external display supports Miracast and how to enable wireless
projection on it, consult the user guide or customer service of the external display
manufacturer.
2
Swipe down from the status bar to open the notification panel, then touch
Wi-Fi.
3
Swipe down further on the notification panel to enable Wireless Projection. Your tablet
will now search for the external display or the wireless HDMI adapter.
Alternatively, go to
4
Touch the name of the external display or the wireless HDMI adapter on the search result
list to start projecting.
Wired Projection
You can connect your tablet to an external display (for example, a TV) using a wired
connection.
It is recommended that you purchase the accessories recommended or specified by Huawei
from authorized sources.
Projection Using a Type-C Cable
1
Prepare a Type-C cable.
Use a Type-C to HDMI, Type-C to DP, or Type-C to MiniDP cable depending on your
external display.
2
Connect the Type-C end to your tablet and the other end to the external display.
3
On the external display, set the corresponding HDMI, DP, or MiniDP input as the signal
source.
Projection Using a Docking Station
If you need to connect your tablet to an external display and use a wired mouse and
keyboard, use a docking station with a USB port.
1
Prepare a docking station.
Multiple types of ports are available on a docking station. If your external display supports
HDMI and you need to use a wired mouse and keyboard, use a docking station with at
least one HDMI port and two USB ports.
2
Connect your tablet and the external display through the docking station, then connect
the wired mouse and keyboard to the docking station.
3
On the external display, set the corresponding HDMI, DP, or MiniDP input as the signal
source.
Settings > More connections and enable Wireless projection.
Smart Features
to turn on
13