Individual Computers Indivision ECS Short Manual

Indivision ECS short manual

Dear customer,

thank you for purchasing a product from Individual Computers. We're sure that your new

flickerfixer will satisfy all your needs. However, we would like to emphasize that installing

the product in an Amiga is very complicated. The required steps require a lot of experience

and skills. Please read this manual throughly to ascertain if you can perform the

installation process. If you have any doubts regarding installation, please seek help from

an expert. Your reseller will be glad to help you.

Please read this guide carefully before commencing installation. Ensure you take suitable

anti-static precautions. Serious damage may result from failure to accurately follow this

guide. Both Individual Computers and your authorised reseller cannot be held responsible

for incorrect installation of this product, including bent/broken pins, damaged motherboard

or damage to the Indivision ECS unit itself.

A PDF-version of this short manual is available on our homepage www.icomp.de, and you

reseller's homepage. This online version of this manual contains high-resolution colour

pictures. The zoom-function of a PDF reader will give you a lot more detail in the pictures

of this manual.

Step 1: Open the computer and locate the Denise-chip

Open the computer and remove everything that may cover the Denise-chip, such as Zorro-

cards or the RF-shield. The following pictures show the most common Amiga models:

Amiga 500

Amiga 2000

Amiga 3000

CDTV

Table of Contents

Do you have a question about the Indivision ECS and is the answer not in the manual?

Page 1 Indivision ECS short manual Dear customer, thank you for purchasing a product from Individual Computers. We're sure that your new flickerfixer will satisfy all your needs. However, we would like to emphasize that installing the product in an Amiga is very complicated. The required steps require a lot of experience and skills.
Page 2 For installation in an A3000T, A1000 and A600, additional parts are required that are not included in the normal Indivision ECS package. If you want to install the flickerfixer in one of these computers, please download the respective manual from our website www.icomp.de.
Page 3 Don't leave it in the computer unconnected, as it may short out and damage other components. If you want to install a second Indivision ECS, please download the corresponding manual from our website www.icomp.de. For using a single Indivision ECS, the jumper should be left at the factory default setting (middle-left).