Advertisement
Step 2
Enter device's IP address in the address bar of the
computer browser.
Step 3
Enter device's username and password in the login
window as shown below.
Click "OK" button to login to the WEB interface of
Step 4
the device.
Note:
The default IP address of the device is "192.168.1.254".
The default username and password of the device is
"admin".
If the username or password is lost, user can restore it to
factory settings via device DIP switch or management
software; all modified configurations will be cleared
after restoring to factory settings, so please backup
configuration file in advance.
Please refer to user manual for specific configuration
method of logging in to WEB interface and other
configurations about network management function.
【Specification】
Panel
10/100 Base-T(X) RJ45,
automatic flow control, full/half
duplex mode, MDI/MDI-X
100M POE copper port
autotunning, POE port,
maximum output power
consumption is 30W.
V+, V-, V+, V- are
POE pins
corresponding to 1, 2, 3, 6.
10/100/1000Base-T(X) or
Gigabit Combo port
1000Base-X
CLI command management
Console port
port (RS-232), RJ45
6-pin 5.08mm pitch terminal
blocks, including 2-pin alarm
terminal blocks. It supports 1
Alarm interface
channel relay alarm information
output, current load capacity is
1A@30VDC or 0.3A@125VAC
Run indicator, interface
Indicator
indicator power indicator, alarm
indicator, PoE indicator
Exchange attributes
Backplane bandwidth
7.6G
Packet buffer size
1Mbit
MAC table size
8K
Power supply
Power supply input voltage:
48VDC
Input power supply
Support dual power supply
redundancy, anti-reverse
6-pin 5.08mm pitch terminal
Access terminal
blocks, including 4-pin power
supply terminal blocks
Consumption
No-load
4.9W@48VDC
Full-load
122.8W@48VDC
Working environment
Working temperature
-40~75℃
Storage temperature
-40~85℃
Working humidity
5%~95% (no condensation)
Protection grade
IP40 (metal shell)
Advertisement
