Canon PowerShot SX500 IS Getting Started page 24

Trying the Camera Out
•
To switch to Shooting mode from Playback mode, press the shutter button
halfway.
Erasing the Images
You can choose and erase unneeded images one by one. Be careful when
erasing images, because they cannot be recovered.
You can also erase all images at once (see Camera User Guide ).
•
22
3
Play movies.
z z Press the <m> button to access the
movie control panel, choose [
press the <q><r> buttons or turn the
<5> dial), and then press the <m>
button again.
Playback now begins, and after the movie
X X
Volume
is finished, [
z z To adjust the volume, press the <o><p>
buttons.
1
Choose an image to erase.
z z Press the <q><r> buttons or turn the
<5> dial to choose an image.
2
Erase the image.
z z Press the <a> button.
z z After [Erase?] is displayed, press the
<q><r> buttons or turn the <5> dial to
choose [Erase], and then press the <m>
button.
The current image is now erased.
X X
z z To cancel erasure, press the <q><r>
buttons or turn the <5> dial to choose
[Cancel], and then press the <m>
button.
] (either
] is displayed.