Qlima A 25 Operating Manual page 35

• Never allow the device to come into contact with chemicals.
• Never submerge the unit in water.
• Do not insert objects into the openings of the unit.
• Always remove the plug from the electric power supply before cleaning or replacing
the unit or components of the unit.
• Never use an extension cable to connect the device to the electric power supply.
• Children should be supervised to ensure that they do not play with the appliance.
• Have any repairs only carried out by a recognised service engineer or your supplier.
• Always remove the plug of the unit from the wall socket when it is not in use.
• A damaged power cord or plug must always be replaced by a recognised electrician or
your supplier.
ATTEnTiOn!
Never use the device with a damaged power cord, plug, cabinet or control panel.
Never trap the power cord or allow it to come into contact with sharp edges.
G
ATTEnTiOn!
Failing to follow the instructions may lead to nullification of the guarantee on
this device.
instaLLation
1. Release the front panel by pressing the clamps, 5, on the left and right hand side of
the air cleaner, and remove the front panel.
2. Remove the filter from the unit and remove the plastic packaging material.
3. Place the filter back in the unit with the white front filter facing to the front.
4. Put the front panel back by first hanging the top edge of the front panel on the two
hooks at the top of the air cleaner and then clipping the two recesses at the bottom
over the clamps, 5, on the bottom of the air cleaner by pushing.
5. The device is now ready for use.
G
• To ensure that it functions properly the filter package must be inserted cor-
rectly and such that the front filter (white side) is positioned on the front side
and the active carbon filter (black side) is positioned at the back.
• For the device to work correctly the air flow must first go through the front
filter, then through the HEPA filter and then through the active carbon.
4
35 35