Related Manuals for Embertec Emberpulse
Summary of Contents for Embertec Emberpulse
- Page 1 Emberpulse® BBSE-AU-BE-01 Complete user manual PATENTS GRANTED AND PATENTS PENDING V6.3W...
-
Page 2: Table Of Contents
Contents Introduction Minimum requirements In your box Safety instructions Hardware Initial setup Registration and connection Install the Emberpulse® app Pulse light operation Initiating a factory reset Energy advice Smart home control FAQs Specifications Warranty... -
Page 3: Introduction
Emberpulse® is an energy management system that provides energy advice, energy monitoring and home control. Save more money. Emberpulse® will continuously assess your home’s unique energy profile to advise you how to maximise energy savings. Savings may include identifying a better energy plan, or pinpointing the best time to install a home battery. -
Page 4: Hardware
Pulse Light Operation section. Hand wave sensor Wave your hand within 1 cm of this sensor to activate the pulse light for an instant status update. Reset button Used to reset your Emberpulse® unit. Power jack Connection for AC power adapter. -
Page 5: Initial Setup
Note that a computer connected by cable to the internet is not sufficient; a Wi-Fi connection is required. 1. Registration and connection To continue the registration process, check if Emberpulse® has sent you a registration email over the last week(s). Yes, I have a registration email No, I don’t have registration email... -
Page 6: Pulse Light Operation
There are two sets of coloured indicators; energy goal indicators and system indicators. Energy goal notifications View real time advice on what’s important to you. Select an energy goal and your Emberpulse® unit will provide real-time performance updates by flashing green, orange or red. Green... - Page 7 You don’t need to guess or constantly check graphs. Simply glance at your Emberpulse® unit’s colour for power usage advice. Below are the Emberpulse® unit’s colour notifications for solar systems with low feed in tariffs and high feed in tariffs.
- Page 8 Save money by using more electricity at cheaper times. The pulsing speed of your Emberpulse® unit indicates how much power your home is currently consuming. A slow pulse speed shows that your home is consuming less power.
- Page 9 This previous period can be defined as last week, last month or last electricity billing cycle. The pulsing speed of your Emberpulse® unit indicates how much power your home is currently consuming. A slow pulse speed shows that your home is consuming less power.
-
Page 10: Initiating A Factory Reset
Emberpulse® cloud. Please review the FAQ before proceeding with a factory reset: emberpulse.com.au/faq To initiate a full factory reset, ensure your Emberpulse® unit is powered on, then press in and hold the reset pin for 5 seconds before releasing. -
Page 11: Energy Advice
Battery storage suitability Unsure if you should consider adding battery storage to your home? Emberpulse® ensures that you don’t get ripped off. Emberpulse® will match your power usage profile with the perfect battery storage solution for your needs. Selecting a battery storage solution that is not tailored to your needs may cost you thousands of dollars over the life of your investment. -
Page 12: Smart Home Control
Air conditioning control (Emberair®) Remotely control your home’s air conditioning from your couch, from work or while on holiday. Use the Emberpulse® app to adjust your home’s temperature before leaving work – and arrive home to a comfortable home. Emberair® is an air conditioner controller that pairs your air conditioning unit to your Emberpulse®. - Page 13 To pair an Emberiq® to Emberpulse®, simply connect the Emberiq® to a power outlet and switch the outlet on. Navigate to the control panel within your Emberpulse® app or via the Emberpulse® online portal (emberpulse.com.au) and select add device. Emberpulse® will detect the Emberiq®...
-
Page 14: Faqs
Q: What should I do if my Emberpulse® unit continually connects and disconnects from my Wi-Fi network? A: This is likely due to a weak signal between your Emberpulse® unit and the Wi-Fi router. Try moving your Emberpulse® unit closer to your Wi-Fi router or install a Wi-Fi range... - Page 15 Q: My Emberpulse® unit is continually disconnecting and reconnecting with my electricity meter. What should I do? A: The signal between your Emberpulse® unit and your electricity meter is being interrupted. Try the following: • Move your Emberpulse® unit closer to your electricity meter.
- Page 16 Weight: 180 g (0.4 lb) Colour: Black front face, silver back Package Contents: Emberpulse® unit, stand, AC power adapter, user manual Environmental Temperature (operating): 0 °C to +40 °C (32 °F to +104 °F) Temperature (storage): -20 °C to +70 °C (-4 °F to +158 °F) Humidity: <...
-
Page 17: Specifications
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced radio/TV technician for help. WARNING: Any changes or modifications not expressively approved by Embertec Pty Ltd could void the user’s authority to operate this equipment. -
Page 18: Warranty
Except as limited here, this product warranty covers any defect in material or workmanship with the Embertec® Emberpulse® unit. If the initial purchase is by a utility or other entity that will not itself be using the device, this warranty is transferable to any customer of such entity who subsequently owns the device who will then be the End User.
Need help?
Do you have a question about the Emberpulse and is the answer not in the manual?
Questions and answers