Brightz Hoop Instructions

Hoop Brightz
™
Instructions
Copyright Brightz, Ltd. 2018
©
Patent Pending • All rights reserved
Adult installation required.
A ladder is frequently required for Hoop Brightz installation: review and follow all safety instructions
provided by ladder manufacturer. Failure to follow ladder manufacturer's instructions can lead to
injury.
Step 1 – Install Batteries
Open latches on the side of the battery pack to access batteries. Install 3 fresh AA batteries,
observing correct polarity (+/-). Close the battery pack, making sure the latches snap shut.
Do not mix old and new batteries and do not mix alkaline, standard (carbon-zinc) or rechargeable
(nicad, ni-mh, etc.) batteries.
Caution: Batteries may explode or leak, and cause burn injury if recharged, disposed of in fire,
mixed with a different battery type, or inserted backwards. Replace all used batteries at the same
time. Clean battery contacts and contacts on the device prior to installing. Remove batteries if item
will not be used for long periods of time. When battery expires remove promptly.
Step 2 – Install Rim String Light Around Basketball Rim
Weave Rim light string (smaller of 2 strings) in net holder hooks. For basketball hoops where
weaving technique does not work, use mounting ties.
Important: Make sure end of light string with battery wire ends up close to backboard.