NuPrime LPS Series User Manual page 7

Keep the component away from radiators, heat registers, stoves, or any other appliance that
produces heat.
The unit must be connected to a power supply only of the type and voltage speci ed on the rear
panel. Connect the component to the power outlet only with the supplied power supply cable or
an exact equivalent. Do not modify the supplied cable.
Do not route the power cord where it will be crushed, pinched, bent, exposed to heat, or
damaged in any way. Pay particular attention to the power cord at the plug and where the cord
exits the back of the unit.
The power cord should be unplugged from the wall outlet during a lightning storm or if the unit is
to be left unused for a long period of time.
Immediately stop using the component and have it inspected and/or serviced by a quali ed
service agency if:
The power supply cord or plug has been damaged.
•
Objects have fallen or liquid has been spilled into the unit.
•
• The unit has been exposed to rain.
The unit shows signs of improper operation.
•
The unit has been dropped or damaged in any way
•
6
www.nuprimeaudio.com