Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for ikbc typemaster X400
- Page 1 typemaster X400 ® User Manual...
- Page 2 typemaster ® X400 Product Introduction The Typemaster is with QWERTY layout, the layout is 87 KEYS, X400 is equipped with MX Low Profile RGB switch. X400 is with Type-C connector so the connector is stronger than before. It’s supporting N-key Roll Over and Dual PCB board and LED backlit X400 is with a passwork lock function on the keyboard, the lock function is protected this keyboard.
- Page 3 Keyboard Specification: Key number: US ASCII (87 keys) = US Layout Key switch lifetime: 50KK Times Dimensions: L 347.5mm、W 146mm、H 28.62mm Interface: USB（DC5V ---- 500mA） Cable length: 1.8 m Function Description: Switch the main switch to the left (red) to lock the keyboard, and turn to the right (green) in order to unlock the keyboard.
- Page 4 Password Protection Function: Keyboard locking feature will be activated when the switch is turned to the left, when keyboard is locked, the keyboard will not be able to provide any service. When is switched to the right, the keyboard is activated and ready to use. A passcode can be set up to activate and deactivate the keyboard as well.
- Page 5 Change Password: 1. Please make sure keyboard is turned on. 2. Press Key. 3. Enter the original password when the number pad is flashing, then press “enter” key to confirm. 4. Press key when it is lit up after entering the correct original password, then you can reset the new 1-6 digits new password.
Need help?
Do you have a question about the typemaster X400 and is the answer not in the manual?
Questions and answers