Advertisement
Advertisement
Table of Contents
Summary of Contents for EZT3D T1
- Page 1 T1 MANUAL Shenzhen EnZhuoTe Technology Co.,Ltd...
- Page 2 Warning Specifications The extruder and hotbed of 3D printer would work in high temperature condition. Do not touch the parts by hand directly. Even after the printing finished, the working parts will still be in a high temperature state for a while. Please be patient to wait for the cooling of the working parts and printed mode.
- Page 3 Layout Sketch Map of Packaging Name Name Number Number A packet of acrylic A packet of screws 200mm long rod Connecting line Power line Pulley accessories Tool kit Limit switch Material frame Extrusion head support Top panel Extrusion head accessories Bottom panel Belt Hot bed...
- Page 4 Check before start You should level the print platform at the first time before printing.
- Page 5 Leveling Instruction Of T1 Note: 1. You should level the print platform at the first time before printing. 2. Please clean the nozzle before leveling, ensure that no other residual material. 3. For the convenience of adjusting the gap between extruder head and print platform, please use an A4 paper to drag between them if moving smoothly.
- Page 6 . Now, start to print your designs and have fun! --- EZT3D Co., Ltd.
Need help?
Do you have a question about the T1 and is the answer not in the manual?
Questions and answers