Tusa ELEMENT Quick Overview

The Surface Sequence scrolls through Surface Mode, Fly, Desat, and Plan mode screens.
As the Surface Sequence scrolls, the button is used to access Log and Set mode screens.
During a dive, the button is used to access Alternate displays of information.
Diagnostic Mode
Fly Mode
Main
press button to view Alt 1
Deep Stop Display
press button to view other
screens
To Activate - press the button

SURFACE DISPLAYS

Surface Mode
(button activated)
Desat Mode
No Decompression Dive Mode
Alt 1
press button to view Alt 2
Safety Stop Display
press button to view other
screens
Surface Mode
(Low Battery)
Plan Mode
Alt 2
5 sec revert to Main

No Deco Deep Stop

• After descending deeper than 80 FT (24 M), then ascending
to within 10 FT (3 M) below 1/2 Max Depth.
• Preview available only deeper than 1/2 Max Depth.
• Stop at 1/2 Max Depth for 2 minutes.
• No Penalty for ascending during the 2 minute countdown.

No Deco Safety Stop

• After descending deeper than 30 FT (9 M), then ascending to
20 FT (6 M).
• Stop at 15 FT (4.5 M) for 3 minutes.
• No Penalty for surfacing during the 3 minute countdown.
Surface Mode
(after dive # 2)
Log Mode Preview
(press button < 2 sec to view
Data and O2)
Deep Stop Preview
press button 2 sec while
viewing Main