Advertisement
Table of Contents
Introduction
Thank you for choosing the DNG-100 Fog Cooler. You now own a rugged and powerful state-of-the-
art machine. Prior to use, we suggest that you carefully read all of the instructions. By
following the suggestions found in this user manual, you can look forward to the reliable and
satisfactory performance of your DNG-100 Fog Cooler for years to come.
Please follow these operation, safety and maintenance instructions to ensure a long
Pay attention to all warning labels and instructions printed on the exterior of your DNG-100 Fog
Cooler
Ideal operating temperature is 10 - 30 degrees Celsius.
After moving or transporting this unit, wait five minutes before operating.
Input fog must be clean. Contaminated fog may damage internal parts.
There must be a free air space of at least 15 cm (6 inches) between the fog cooler intake and
the fog machine output.
After interrupting operation, wait three minutes before starting again.
Keep this device dry.
For inside use only. Not designed for outside use.
Keep fog cooler upright. Do not tilt this device. Angle of inclination may not exceed 10 degrees.
Turn off or unplug when not in use.
This machine is not water- or splash-proof. If moisture, water, or fog liquid gets inside the
housing, immediately unplug the unit and contact a service technician or Pea Soup before using
it again.
No user serviceable parts inside. Refer to Pea Soup or other qualified service personnel.
For adult use only. Fog cooler must be installed out of the reach of children. Never leave the
unit running unattended.
Locate the fog cooler in a well-ventilated area. Never cover the unit's vents. The fog cooler is
best installed 1 meter away from all objects.
Use only DNG-100 FLR Fog Liquid, designed to disperse quickly before rising.
If your DNG-100 Fog Cooler fails to work properly, discontinue use immediately. Pack the unit
securely (preferably in the original packing material) and contact Pea Soup for service.
Unpacking & Inspection
Open the shipping carton and verify that all equipment necessary to operate the system has arrived
intact. Refer to the "Features" section for information on what items are included with your model.
If any equipment is missing contact Pea Soup immediately.
Before beginning initial setup of your DNG-100 Fog Cooler, make sure that there is no evident
damage caused by transportation. In the event that the unit's housing or cable is damaged, do not
plug it in and do not attempt to use it until after contacting Pea Soup for assistance.
Pea Soup
www.smokemachines.net
DNG-100 Fog Cooler
Congratulations on the purchase of your new
DNG-100 FOG COOLER
and safe life for your fog cooler.
Advertisement
Table of Contents
Related Manuals for Pea Soup DNG-100
Summary of Contents for Pea Soup DNG-100
- Page 1 DNG-100 FOG COOLER Introduction Thank you for choosing the DNG-100 Fog Cooler. You now own a rugged and powerful state-of-the- art machine. Prior to use, we suggest that you carefully read all of the instructions. By following the suggestions found in this user manual, you can look forward to the reliable and satisfactory performance of your DNG-100 Fog Cooler for years to come.
- Page 2 The DNG-100 Fog Cooler’s output volume is determined by the output volume of the fog machine to which it is attached. Your DNG-100 dealer has the hoses and adapters required for an optimal installation of the fog cooler. See the two illustrations below: In the first example, a fog conducting hose (FT-10) is attached to a fog machine’s output nozzle via...
Need help?
Do you have a question about the DNG-100 and is the answer not in the manual?
Questions and answers