Tannoy Pole Mount Adaptor Manual

Pole Mount Adaptor
TANNOY Pole Mount Adaptors facilitate the installation
and mounting of speakers onto beams, poles and posts,
providing robust support in both indoor and outdoor
applications. Pole Mount Adaptors can be used with
standard TANNOY yoke brackets or K-Ball brackets.
Pole Mount Adaptors are available in black and white or they
can be painted to match the surrounding space. The adapter
will fi x to poles ranging from 77 to 228 mm diameter.
Installation Using Yoke Brackets
• •
Use the fi xings supplied with your speaker to fi x the
empty yoke bracket to the un-mounted pole bracket
adaptor. (Diff erent speaker models require diff erent
numbers of fi xing screws. Refer to your speakers'
documentation for details.)
• •
Fix the pole mount bracket adaptor to the pole using
the strapping provided. The bracket can be mounted
in portrait or landscape orientations.
• •
See the main product QSG for further specifi c
information about proper connection and fi xings for
your speaker.
Installation Using K-Ball Brackets
• •
Pass the speaker wire through the un-fi xed pole
mount adaptor plate.
• •
Connect the speaker wires to the connector block
in the rear of the K-Ball bracket. (See the K-Ball
documentation for specifi c connection instructions.)
• •
Off er the K-Ball bracket up to the adaptor plate
(if outdoors, with the foam gasket squeezed in
between, if outdoors).