Related Manuals for Bowens Esprit Gemini Bwl-0353
Summary of Contents for Bowens Esprit Gemini Bwl-0353
- Page 1 ESPRIT GEMINI INSTRUCTIONS BWL-0353/1 (04/05) BOWENS INTERNATIONAL LIMITED 355 Old Road Clacton on Sea Essex CO15 3RH UK Tel: +44 (0)1255 422807 Fax: +44 (0)1255 436342 www.bowens.co.uk...
-
Page 2: Specifications
On/Off 275W Photoflood 250W Halostar 2.9Kg 365 x 145 x 130mm Due to our policy of constant product improvement, Bowens International reserves the right to change equipment specifications at any time and without notice. 10 - 11 Specifications GM500 GM750+... -
Page 3: Safety Notes
Sync Voltage All ‘S-Type’ accessories from the Bowens range can be used with the Esprit Gemini. For details of Flash Colour Temperature all related products, please contact your local distributor, a list of which can be found at Circuit Protection www.bowens.co.uk. -
Page 4: Control Panel Guide
40° Sunlite Battery Power Reflector. BW1885 Inlet Visit www.bowens.co.uk for the widest range of photographic lighting accessories Photocell With the Esprit Gemini you are free from mains power cables. With the Pulsar Radio Trigger system you can free yourself from sync cables too! -
Page 5: Flash Tube Replacement
BW-1227 Bowens Universal 2Amp SLA Charger. www.bowens.co.uk Connecting & Using the Esprit Gemini The Esprit Gemini unit may be operated either on a mains supply or with a Bowens battery source such as the Bowens Travel-Pak. !!! WARNING HIGH VOLTAGE !!! NEVER CONNECT THE ESPRIT GEMINI TO BOTH A MAINS SUPPLY AND A BATTERY SUPPLY AT THE SAME TIME. -
Page 6: Modelling Lamp Control
The photocell is mounted behind the red transparent cover on the top of the unit. The photocell on/off switch is located on the rear control panel. www.bowens.co.uk With the modelling lamp control switch (Fig.1. 3) in the upper position the modelling light is OFF. With the modelling light set to centre the modelling light will go out when the unit is flashed and come back on when the unit comes to ready.