Primo Water EuroSpa PRI-350 Manual page 5

1. In order to assemble this product, use a Philips head screwdriver
screws and assembling devices are tight and not loose, as they could hurt your child or put
him in serious danger.
2. The changing unit is fitted with locking wheels. These must be engaged at all times while
the changing unit is being used with your baby.
3. Always leave the bath positioned on the changing station's frame, even when you are
using the EuroSpa to change your child.
4. Never leave the changing unit near any source of extreme heat.
5. Clean the product with warm water and soap or mild detergent. Do not use bleach or
abrasive substances.
WARNING - NOT A SAFETY DEVICE!
WARNING - DROWNING HAZARD!
•
Infants have
• NEVER
FALL HAZARD
•
ALWAYS
ALWAYS
•
bath tub. Safe water temperature is 90-100°F (32.2-37.8°C).
•
Infants can drown in as little as 1 inch of water.
ALWAYS
NEVER
•
• NEVER
supervision.
•
Discontinue use of product if damaged or broken.
•
This product is not a toy. Do not allow children to play with
EuroSpa product.
ALWAYS
•
table.
INSTRUCTIONS FOR SAFE USE
DROWNED
lift this product with an infant in it.
– To prevent death or serious injury,
keep infant within arm's reach.
check water temperature before placing infant into
bathe your infant using as little water as necessary.
leave bath or changing table with child using it.
allow other children to substitute for adult
use restraining strap when child is on changing
EuroSpa™ Part # 350-090110)
(PRIMO
®
in infant bath tubs.
5
Make sure that all
.