Polygroup FL18 Assembly Instructions

NEED HELP?
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com
TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from
Carefully follow the instructions below on how to quickly and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface.
Fig. A - Tree Stand Assembly
Eye Bolt
Fig. B - Tree and Light Assembly
3. Each tree section is numbered with a tag. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Start with the bottom section and remove protective cap before inserting into the
assembled stand. Make sure the pole is firmly inserted and secured into the stand.
5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.
6. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all wires are free of branch hinges.
7. Connect the plug(s) securely to the extension cord(s) as per the color labels indicated in (See Fig. B) and insert the green label adpter
into the wall outlet. Your entire tree should now be lit. If some bulbs do not light or flicker, search for any loose plugs and/or broken,
loose or missing bulbs. Replace bulbs promptly in order to maintain the performance and life expectancy of your pre-lit tree.
8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from the pole and fan out one to the
right, one to the left and one at the center of the main stem. (See Fig. C)
1-888-919-0070
OR
Polygroup®!
Eye Bolt
Click
Tree top
Section 4
Section 3
Section 2
Section 1
(See Fig. A)
1. Pull apart the legs of the stand so that they are
2. When inserting the bottom section of the tree
Insert Red Label
Plugs Into Red
Labeled Extension Cord
Foot Pedal
on/off switch
1
TREE# : FL18
MODEL # :
SKU # : 124304392
snapped into an x-shape, place the tree stand
on a level surface.
into the assembled stand, insert and turn the
eyebolts into the stand and tighten until the
tree pole is firmly secured.
To close the stand, remove the eyebolts, press
the metal button and fold the legs together.
*Electrical Rating For The Tree
(For Indoor Use Only)
Input: 120V, 60Hz 0.38A
Output: 28V DC 0.643A
Insert Yellow Label
Plugs Into Yellow
Labeled Extension Cord
Insert Blue Label
Plugs Into Blue
Labeled Extension Cord
Insert Purple Label
Plugs Into Purple
Labeled Extension Cord
Adapter
Insert Green
To Be Plugged
Label Extension
Into Wall
Cord into Adapter
Outlet
TGC0M4907L00