Home Decorators Collection TG90P3D31D01 Quick Start Manual

DECORATORS
C O L L E C T I O N
®
NEED HELP?
DO NOT RETURN TO STORE. Call: 1-877-527-0313
Form 8am to 5pm EST, Monday through Friday.

Safety Information

IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions should always
be followed, including the following:
READ AND FOLLOW ALL
a.
SAFETY INSTRUCTIONS.
b. Do not use seasonal products outdoors unless marked suitable for
indoor and outdoor use. When products are used in outdoor applications,
connect the product to a Ground Fault Circuit Interrupting (GFCI)
outlet. If one is not provided, contact a qualified electrician for proper
installation.
c. This seasonal product is not intended for permanent installation or use.
d. Do not mount or place the product near gas or electric heaters,
fireplaces, candles, or other similar sources of heat.
e. Do not secure the wiring of the product with staples or nails, or place on
sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when retiring for the
night, or if left unattended.
h. This is an electric product and not a toy! To avoid risk of fire, burns,
personal injury and electric shock it should not be played with or
placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire, or light string.
k. Do not close doors or windows on the product or extensions cords as
this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any materi al that is not
a part of the product when in use.
m. This product is equipped with push-in type lamps. Do not twist lamps.
n. Read and follow all instructions that are on the product or provide with
the product.
SAVE THESE INSTRUCTIONS
o.
Pre-Assembly
Package Contents
Part Description
A Tree top
B Tree center, Sticker 3
C Tree center, Sticker 2
D Tree center, Sticker 1
E Tree stand

Assembly

Assembling the tree stand

Step 1. Pull apart the legs of the stand so that they are snapped
Step 2. When inserting the bottom section of the tree into the
To close the stand, remove the eyebolts, press the metal button and
fold the legs together.

Assembling the tree

This tree assmebles with Quick Set® technology
---Set up and light up your tree in less than 10 minutes!
Step 1.
Step 2.
Step 3.
Step 4.
Step 5.
Step 6.
Section 2
Quantity
1
1
Section 1
1
1
1
Model: TG90P3D31D01
into an x-shape, place the tree stand on a level surface.
assembled stand, insert and turn the eyebolts into the
stand and tighten until the tree pole is firmly secured.
Remove the protective caps from the tree bottom and
insert the pole into the tree stand.
Continue by inserting the upper tree section(s) to the
lower section(s) until inserting the tree top.
Shape the branches to your preference by working from
the bottom to the top. When adjusting branches, ensure
that all wires are free of branch hinges.
Insert the adapter into the wall outlet. All your lights
should now be lit.
Shape the tree from the bottom to the top. Start with the
branches farthest from the pole – fan out in a star shape,
and continue until the entire tree is shaped.
Top view
When finished shaping the branches, slightly upsweep all
branch tips for a uniform look.
Tree top
100S
50S
100S
100S
Section 3
100S
100S
100S
50S
100S
100S
100S
50S
100S
100S
Control box
Christmas Tree
Sku # 1005 235 106
Click
Side view
Do Not Tamper
Internal Parts
Open the
cap cover
Align both arrows
in a straight line
before sliding
down to insert
Adapter
To Be Plugged
Into Wall
Outlet
Foot Pedal
on/off Switch