Table of Contents
Advertisement
Safety precautions
N OTE
• If you experience problems during
installation, consult your Kenw ood dealer.
• If the unit does not seem to be w orking
right, try pressing the reset button first. If
that does not solve the problem, consult
your Kenw ood dealer.
• Press the reset button if the Disc auto
changer fails to operate correctly. Normal
operation should be resloved.
Reset button
• Characters in the LCD may become difficult
to read in temperatures below 41 ˚F (5 ˚C).
• The illustrations of the display and the panel
appearing in this manual are examples used
to explain more clearly how the controls are
used. Therefore, w hat appears on the display
in the illustrations may differ from w hat
appears on the display on the actual
equipment, and some of the illustrations on
the display may represent something
impossible in actual operation.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get
dirty, w ipe them w ith a dry, soft cloth.
Cleaning the Unit
If the faceplate of this unit is stained, w ipe it
w ith a dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, w ipe the stain
off w ith a cloth moistened w ith neutral
cleaner, then w ipe neutral detergent off.
Applying spray cleaner directly to the unit may
affect its mechanical parts. Wiping the
faceplate w ith a hard cloth or using a volatile
liquid such as thinner or alcohol may scratch
the surface or erases characters.
About Cassette tape
Cleaning the tape head
When there's noise or the sound quality is bad
during tape play the tape head maybe dirty,
clean the tape head.
About Cassette tape
• If the tape is slack tighten it.
• If the cassette tape label is peeling off glue it
on again.
• Don't use deformed cassette tape.
• Don't place cassette tape on the dashboard
etc. w here the temperature is high.
• Don't use cassette tape that's 100 minutes
long or longer.
— 4 —
Advertisement
Table of Contents
