Page 1
Requirements: Windows2000, XP, VISTA,Win7,Win8 Introduction above Congratulations your purchase Super-speed Linux 2.4.X External Enclosure. Enclosure provides fast fainiand AMD or Intel Pentium MHz or better easy way to more storage space your computer. Please read this manual carefully rene using this device.
Page 2
Hardware Installation choose [New Partition...]. The “New partition wizard” will Windows 2000/XP/VISTA/7/8 appear. Step4 driver installation necessary. Following the "wizard" instructions to partition and format enclosure will detected your computer your HDD automatically. Step5 IMPORTANT: Unplugging device that supports safe Wait until "wizard"...
Page 3
Installation hard disk drive (1L35648-U3) Step 1: Take out the two screws on the back First Take off the left L/R panel from plastic frame, and Step then Insert cable hard disk Corresponding 145P connector HDD.Then into plastic frame...
Page 4
Step Gently move location of the HDD, HDD's left right side screw hole align the holes on the plastic frame, Then using L/R panel to fix HDD. (note the difference between L, R) Step HDD Installation completed Step 5: Inset the plastic frame into the aluminum housing...
Need help?
Do you have a question about the 1L35648-U3 and is the answer not in the manual?
Questions and answers