Description (Fig. A); Initial Use - Princess KooZzzi Manual

Congratulations!
You have purchased a KooZzzi appliance.
Our aim is to provide quality products with
a tasteful design and at an affordable price.
We hope that you will enjoy this appliance
for many years.

Description (fig. A)

Your 549003 KooZzzi rechargeable bed
warmer has been designed for the following
applications:
- to regulate the body temperature of
babies and young children;
- for other wellness purposes for adults and
older children.
The appliance does not require any liquids.
The integrated heating element heats up the
internal ceramic material in the bottle.
The bottle has a rubber coating which feels
comportable and must be wrapped in a pouch
and a towel. The appliance provides heat for
many hours, depending on the use of a towel,
the use of a blanket or a duvet, and the room
temperature.
The appliance comes with a standard pouch,
but other pouches are available.
The appliance is suitable for domestic use only.
1. Bottle
2. Handgrip
3. Charging connection
4. Charging station
5. Power indicator
6. Pouch

Initial use

•
Clean the bottle. Refer to the section
"Cleaning and maintenance".
•
Clean the pouch. Refer to the section
"Cleaning and maintenance".
• Clean the charging station. Refer to the
section "Cleaning and maintenance".
Use
Charging the appliance (fig. A & B)
The appliance must be charged for
approximately 10 minutes.
Before you proceed, we need you to pay
attention to the following notes:
- Do not use the charging station for other
purposes than charging the appliance.
- Do not move the appliance during the
charging process.
- Do not leave the appliance unattended
when the appliance is placed in the
charging station and the mains plug is
connected to the mains. Only charge the
appliance in a room where it is visible at all
times. If the appliance has been charged
completely, remove the appliance from the
charging station and disconnect the mains
plug from the mains.
•
Place the charging station (4) on a stable
and flat surface.
• Insert the mains plug of the charging
station (4) into the wall socket. The power
indicator (5) comes on.
•
Place the bottle (1) with the charging
connection (3) into the charging station
(4). A buzzer will sound for 3 seconds to
indicate the correct position. The charging
process starts automatically.
•
If the process is completed, a buzzer will
sound 10 times after approximately
7-8 minutes. After a few seconds, the
buzzer will sound another 20 times. The
charging process stops automatically.
Note: The bottle will not feel warm directly
after the charging process. The bottle will only
feel warm after approximately 5 minutes after
the charging process is completed.
The maximum temperature will only be
reached if the pouched bottle is wrapped in
a towel and placed under the bedclothes.
• Immediately remove the bottle (1) from
the charging station (4).
•
If the bottle (1) is not removed immediately
after the charging process, take the
following actions:
9