Sunnydaze Decor HH-MHS Manual

UNIVERSAL MULTI - USE HAMMOCK STAND
Read all assembly and care instructions carefully before using this product. Save these instructions for future reference.
Assemble components on a soft, clean surface to avoid scratching/damaging the finish.
(2) Top Support
Ensure all parts are
accounted for before
disposing of packaging.
5

ASSEMBLY

After completing each step, repeat the step for the opposite side of the hammock stand.
1. Connect the Top Support to the Diagonal Bars, as shown.
2. Slide two Plastic Feet onto the Base Bar.
3. Connect the Base Bars to the Diagonal Bars.
4. Connect the Cross Bar to the Diagonal Bars using the Bolt, Washer and Wing Nut Sets, as shown.
5. Attach the Hook Bolt to the center of the Cross Bar, as shown.
35029
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we
sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof
of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
Photos are used to determine the cause of defects and for future quality control. Register your warranty at
www.serenityhealth.com/warranty/
If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:
customerservice@serenityhealth.com, or via our contact us page at
Select a smooth, level surface to place the hammock stand.
(4) Diagonal Bar
(2) Base Bar
4
/ / Order/Customer Reference Number:
HH-MHS
(4) Bolt, Washers, Wing Nut Set
(2) Cross Bar
(4) Plastic Foot (2) Hook Bolt, Washer, Wing Nut Set
3
11/2019
www.SerenityHealth.com/contact-us/
1
2
(2) S-Hook
(2) Chain
550
pounds
249 kg
Page 1 / 2