AIR GIZMOS KD1 User Instructions

Step 1:
Remove Velcro Loop
Step 2:
Attach Velcro Loop
Step 3:
Adjusting Knee Pad Dock for iPad2 or iPad3
Step 4:
Attaching top bracket
1100 Jupiter Road, Suite 110, Plano, TX 75074 • (972) 671-8001 tel • (972) 231-3870 fax
User Instructions for iPad Knee Dock
Compatible with iPad, iPad2, and iPad3
Revision 2, March 30, 2018
Thank you for purchasing an AirGizmos Knee Dock. This mount was
designed to securely hold your portable electronic device. We hope you
receive years of enjoyment from our product. Before beginning the
installation process, please take a moment to fill out the registration card.
NOTE:
The Knee Dock comes with additional plastic parts, which are snapped in
place only if you are using iPad2 or iPad3.
Remove 2 Velcro Loop pieces from the Velcro Hook
part of the Knee Dock.
Attach Velcro Loop piece to the pen, which you are
going to be using. Pen (or any writing device you are
using) is placed on to the Velcro Hook part of the Dock.
(Two Velcro Loop pieces are provided with the Dock)
Use the bag with plastic parts, provided with the Knee Pad
Dock to fit for iPad2.
If you are using iPad1, skip to Step 7.
If you are using iPad1, Step 4 - 6 are NOT NEEDED.
The Dock is ready for inserting iPad1 as is.
Fit the top bracket in the space on the top of the Dock provided
with the Knee Dock to adjust for the iPad2 or iPad3.
Once in place, firmly push from both sides towards the center.