Advertisement
Quick Links
Advertisement
Summary of Contents for ALEXANDRE MEERSON D15 Mk-1 GMT
- Page 1 OPERATING MANUAL & WARRANTY AUTOMATIC MOVEMENT AM - 4705...
- Page 2 “DISCRETION, PERFORMANCE AND ART IN DETAIL.”...
-
Page 3: Table Of Contents
CONTENTS INTRODUCTION INSTRUCTION FOR USE SPECIFICATIONS ACCURACY WATER RESISTANCE SERVICE INTERNATIONAL WARRANTY... -
Page 4: Introduction
The crown is used to manually wind and to set the time and date on your watch. Note that the D15 Mk-1 GMT is equipped with a screwed-down crown, which is further detailed in the instructions below. Please remember to remove your watch before winding or setting, and ensure the crown is always returned to the fully closed and screwed down position (position 1;... - Page 5 The crown of the D15 Mk-1 GMT is specially designed to enhance the water The D15 Mk-1 GMT displays time for two time zones, as well as date and time resistance and durability of your watch by screwing in tight to the case when not in of day or night for the ‘local’...
- Page 6 past and then back to the desired time for the second time zone (24hr hand), closed position (see page 14 for instructions). which will ensure accurate adjustment. We do not advise adjusting the time zone if the local time on your watch is If you wish to set the local time to a different time zone, do this now by using currently showing a time between the hours of 23:00 and 24:00;...
- Page 7 FIGURE 1 : D15 Mk-1 GMT (AM-4705) FIGURE 2 : D15 Mk-1 GMT (AM-4705) CROWN POSITIONS INDENTIFICATION OF PARTS Position 1: Fully closed & screwed down Position 2: Winding A: Forward time zone correction pusher Position 3: B: Reverse time zone correction pusher...
-
Page 8: Specifications
TECHNICAL SPECIFICATIONS OF THE AM-4705 Diameter: 25.60mm, 11½ lignes Height: 4.95mm Number of parts: 189 Number of jewels: 28 Winding rotor: Central rotor Power reserve: approximately 50 hours Antishock: Incabloc® Balance: Glucydur® Frequency: 4 Hz (28,800 bph) Chronometry: Automatic, two barrels in series Decoration: - Bridges nished with Côtes de Genève - Circular graining on the main plate and gear wheels... -
Page 9: Accuracy
To ensure its robustness, we design and test the water resistance of each If you notice signi cant irregularities in the timekeeping of your watch, please ALEXANDRE MEERSON watch to be signi cantly above its of cial rating; take it to an authorised ALEXANDRE MEERSON Retailer or approved Service however, please note that your watch is only guaranteed to the rating listed on Centre. -
Page 10: International Warranty
The International Warranty allows you to take your timepiece to any approved Servicing will take 4-6 weeks from the date we receive your watch. If your watch ALEXANDRE MEERSON Retailer or Service Centre to initiate a claim. You may requires repairs above and beyond the normal servicing procedures and you also send in your timepiece to make a claim, but you must rst contact our of ce would like us to fully restore it, we will rst issue a quote for the additional work. - Page 11 OPERATING MANUAL & WARRANTY AUTOMATIC MOVEMENT AM-4705 MEERSON.COM 02.16...
Need help?
Do you have a question about the D15 Mk-1 GMT and is the answer not in the manual?
Questions and answers