Leigh VRS1200 Installation & Setup Manual

The swivel action vacuum port accepts a 11/2" (38mm) diameter hose. Attach
Step 12
your shop vacuum hose to the dust collection port on the vacuum box assembly.
2" (51mm)
Adaptor
Two hose adaptors, 2" (51mm) and 2 1/2" (63.5mm), are included with the
Step 13
VRS1200.
A
A
When routing, the VRS1200 beam should be moved closer to the workpiece
Step 14
for maximum chip collection. The tabs on either side of the vacuum box should be
A
close to, but not touching the workpiece. The guide bushing mounted to the router
base is positioned between the tabs of the dust collector.
A
Step 15 As the router moves across the beam, in and around the fingers, the guide bushing
attached to the router base contacts the vacuum box tabs
The vacuum box is always positioned for maximum dust collection.
D
B
I
E
G
H
K
2-1/2" (63.5mm)
Adaptor
J
L
PART DESCRIPTION
VRS1200 Beam Extrusion with Decals
A
B Left Support Bracket
C Right Support Bracket
Support Bracket Set Screw 1/4"- 20 x 1/2"
D
Left End Cap with Spring
E
F Right End Cap with Spring
G End Housing Screw No.8 - 32 x 1"
H Support Bracket Knob
Support Bracket Nut 3/8"- 16
I
J Vacuum Box Assembly
K 2" (51mm) Vacuum Box Hose Adaptor
L 2-1/2" (63.5mm) Vacuum Box Hose Adaptor
Hex Key
M
N Fully Illustrated Setup guide
See Online Installation & Setup Video at www.leighjigs.com
Customer Support
1-800-663-8932 help@leighjigs.com
For a list of Leigh dealers, visit www.leighjigs.com
© 2018 Leigh Industries Ltd. All rights reserved. No part of this publication may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
recording, or otherwise, without the prior written permission of Leigh Industries Ltd.
Leigh Industries Ltd. is not an authorized dealer, distributor or service provider or otherwise
Leigh Router Joinery Jigs affiliated or associated with Porter Cable. 10/2018
Dovetail Jig Vacuum & Router Support
VRS1200
A
Installation & Setup Guide
and moves it across the beam.
A
N
D
A
C
H
I
F
G
M
Step 1
your learning time dramatically. The video can be streamed to your smart phone or
PART NO. QUANTITY
tablet and used in your shop as a visual reference. Visit leighjigs.com and find the video
426105 1
in the Support section.
426175 1
426180 1
426185 2
426220 1
426225 1
426190 2
426207 2
426208 2
426230 1
426150 1
426155 1
426216 1
426240 1
Step 2
raise the template about 1". Loosely tighten the knobs to hold the template in place.
Printed in China
Fits Porter Cable 4210, 4212 & 4216
US Patent No.7,507,060 B2 UK Patent No.GB2446909 Canada Patent No. 2,611,233
IMPORTANT
Watch the Online
Instructional Video
in the Support Section
at www.leighjigs.com
Watching the online video in addition to reading this user guide will reduce
A
To do the , start by loosening the jigs template knobs
one-time setup
A
and
A
Leigh Router Joinery Jigs