Advertisement
Quick Links
INSTRUCTIONS
RISK OF PERSONAL INJURY –The EZ-AC is not designed to support the weight
of people or animals, DO NOT place children on the unit or attempt to use
this as a personal support. The EZ-AC is designed for the support of air
conditioner units only!
WARNING: FAILURE TO FOLLOW THESE INSTRUCTIONS AND WARNINGS MAY
RESULT IN DEATH, INJURY, OR SIGNIFICANT PROPERTY DAMAGE - For your
protection, read and follow these warnings and instructions carefully before
installing or maintaining this fixture. These instructions do not attempt to
cover all installation and maintenance situations. If you do not understand
these instructions or additional information is required, contact Paramount
Tool at 508-672-0844.
DELIVERY: Upon receipt of fixture and accessories (packed separately),
thoroughly inspect for any freight damage. All damage should be reported to
the delivery carrier. Do not install damaged EZ-AC units. ]
TROUBLESHOOTING CAUTION- If this fixture fails to operate properly, check
to make sure: •All fasteners are tightened sufficiently. • The support foot is
flat against your home •There are no broken or bent portions of the unit.
1. Find a clear area in which you can work.
2. Carefully review instructions prior to assembly.
3. Gather tools required:7/16" open-ended wrench, 7/16" socket
wrench.
4. Place your air conditioner on the floor within your working area
Save these instructions for future reference.
Advertisement
Summary of Contents for Paramount Fitness EZ-AC
- Page 1 RISK OF PERSONAL INJURY –The EZ-AC is not designed to support the weight of people or animals, DO NOT place children on the unit or attempt to use this as a personal support. The EZ-AC is designed for the support of air conditioner units only!
- Page 2 Completed Unit...
-
Page 3: Included Hardware
Parts List Included hardware- Bolts, Nuts, Washers, Adjustment Knob... - Page 4 Part B using included 5” hex shoulder bolt, two washers and a nylon lock-nut as shown above. (the assembly will need to be adjusted once the entire EZ-AC is assembled.) Step Two- Assembly B -Using a wrench and a socket wrench, attach assembly A (Step one) to Part C using 5”...
- Page 5 Step 3- Assembly C -Using a wrench and a socket wrench, attach part D (Step one) to Part E using two 5” hex bolts, 2 washers and 2 nylon lock-nuts as shown. Step 4- Assembly D- (Consisting of assembly B&C) -Using a wrench and a socket wrench, attach assembly B (Step two) to assembly C by using two 5”...
- Page 6 Incorrect Placement Correct Placement To assemble the front portion of the EZ-AC you will need to use the window you plan to install you’re A/C unit as a gage. -Place parts F and G as shown in the photo above and slide them away from each other to the base and sides of your window frame as tight as possible.
- Page 7 place it through any hole out of the way of the center area as shown in the photo. Remove the unit from the window and apply a washer and nylon-lock nut to the underside and tighten with a socket wrench. Step 5-Assembly F- Consisting of Assembly D&E -Attach assembly E to the relative center of assembly D using a washer and nylon-lock nut.
- Page 8 Step 6- Assembly G -To assemble part H and I to the main assembly (F) you will need to use your air-conditioner as a gage. -Place parts H and I on the edges of your air-conditioner as shown with threaded pem-studs facing up as shown above. Be sure they are tight against your air-conditioner.
- Page 9 Step 7- Installing the EZ-AC -Insert the EZ-AC through the window as shown. Be sure the EZ-AC is at a slight downwards angle as shown in the example above. -If the EZ-AC does not rest at the angle shown above, remove it from your window- adjust the sliding assembly (assembly A) and the adjustment knob and retry.
- Page 10 Step 8- Installing your air conditioner -Lift your air-conditioner and place onto the EZ-AC be sure the edges of your air conditioner rest in between the tracks (parts H and I). Extend the curtains and close your window onto the EZ-AC.
- Page 11 The EZ-AC Assembly and Installation manual is proprietary to Paramount Tool LLC and no ownership rights are hereby transferred. No part of the Manual shall be used, reproduced, translated, converted, adapted, stored in a retrieval system, communicated or transmitted by any means, for any...