in2digi D-JV-2 Series Installation Instructions Manual

Installation Instructions for
in2digi D-JV-2 Series
Digital Radio
NOTE:
Antenna placement, cable routing and grounding is critical in any DAB
installation.
Please ensure you carefully read all installation documentation and
referenced instructions (stored at www.in2digi.com website).
Step 1
If the installation of the in2digi module is as a replacement to
upgrade the vehicle from an OEM fitted DAB to DAB+ functionality
then no further vehicle configuration update is required.
For a new installation then a vehicle configuration update is required
– see Appendix 1.
This process usually needs to be completed by a JLR dealer.
Step 2
Install the antenna as directed by the manufacturer's instructions.
**The in2digi installation documentation offers guidance for positioning.
Final vehicle placement rests with the fitter and should support optimal
reception performance.
Route the antenna cable to the DAB module ensuring that it does not
obstruct any potential air bag deployment.
Stow any excess cable carefully ensuring that any cable bend has at
least a 10mm radius.
Step 3
The DAB module fitment positioning (suggested solutions for differing
vehicle platforms follows) has an associated dependency for power
selection.
Please refer to document "JLR DAB Module Power" for details.
DAB Module
in2digi D-JV series
MOST
Head Unit
(IAM)
Step 4
The DAB module needs to be added into the Infotainment fibre optic ring.
All required joiner parts are supplied with the product.
Please refer to documentation "DAB Module Ring Optics" for details.
Finalisation:
Ensure that the correct module firmware version is loaded for the target vehicle
application.
With steps 1 to 4 complete then the system is ready to be run.
If required, please refer to document "Clearing the DAB Station List (for non UK
markets)" for details.
It is always advisable to check that the module has the latest firmware version loaded.
Please refer to document "D-JV-2 Firmware Version Read Process" for details on how
to check the version
Product Information
Antenna
Rest of the
MOST network
ring