Advertisement
Quick Links
Upgrade instructions V305
With the update to release 305, your Touch E3 will be connected to a new, more powerful server. That
requires, that you update your mobile app as well to the
CLEVERTOUCH
that you can find in your app-store.
If you want to access it via your web browser, please use
https://e3.lvi.eu
To upgrade your Touch E3, please follow the instruction below:
1. Use a Micro SD card (max. 8GB FAT formatted)
2. Format (Delete) the micro SD card.
Attention, that deletes all data on the SD card. Please make sure that data that you want to
keep from the SD card is backed up before!!!
3.
Download the new firmware from
http://www.lvi.eu/downloads/software.htm
4. Extract (Unzip) the downloaded file
5. Copy all extracted files to your Micro SD card. It has to contain 4 files
Old_conf.bin
Update.bin
wifi.hex
wifi.ini
6. Insert the Micro SD Card to your Touch E3
7.
Make sure your Touch E3 is securely connected to electricity. A power cut during upgrade might
damage your device permanent!
8. Go to the main page and choose [MENU]
Gen.2
Advertisement
Summary of Contents for E3 CleverTouch Gen.2
- Page 1 Upgrade instructions V305 With the update to release 305, your Touch E3 will be connected to a new, more powerful server. That requires, that you update your mobile app as well to the CLEVERTOUCH Gen.2 that you can find in your app-store.
- Page 2 5 seconds 12. The upgrade could take some time (up to 5 minutes). Depending on firmware release you had before, you will see between 1 to 3 upgrade cycles, where the TOUCH E3 is rebooting and upgrading automatically Do not disconnect from power or switch it off at any time during upgrade process.
- Page 3 I cannot see my touch E3, my rooms or radiators in the app or on the web page. Please reboot your Touch E3. Please make sure that there is no SD card inserted into your Touch E3. With rebooting the Touch E3, it is synchronizing its entire data with the server and not only changes.