Advertisement
Installation
1
Remove all the bolts(Ea) and washers
from the table rim(A) and table lges(B)
Place the table rim(A) upside down on a non-abrasive work
surface and attach the table leg(B) to the table top(A) by using
two bolts(Ea) through two washers, through table leg(B) and
into tabletop(A).
Do not tighten completely.
Repeat procedure for the other three legs.
B
A
3
Tightening all the bolts
Turn table upright, then tighten all bolts (Ea) by diagonal pattern.
Place the glass top(D) on the table rim(A).
Your table is now ready for use.
Ea
D
2
Attach the metal center ring(C) to
the table legs(B)
Attach the metal center ring(C) to the table legs(B) by using two bolts(Ea)
through two washers, through metal center ring(C) and into table leg(B).
Do not tighten completely.
Repeat procedure for the other three legs.
B
A
4
Ea
C
Advertisement
