Table of Contents
Advertisement
Brought to You by www.snapwhole.com
result from prolonged inhalation of asbestos particles. Accordingly, wear appropriate
ANSI approved respiratory devices and proper protective clothing when working near
any brake pads.
17. Always keep brake fluid from contacting the vehicle's paint finish. Brake fluid will
damage the paint finish on vehicles.
Warning: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be under-
stood by the operator that common sense and caution are factors which cannot be built
into this product, but must be supplied by the operator.
When unpacking, check to make sure the following parts are included. If any parts are miss-
ing or broken, please call Harbor Freight Tools at the number on the cover of this manual as
soon as possible.
Handle Bar (1)
Fluid Hose (20)
SF20 Quick Coupler (21)
Preparation
1.
Place vehicle on a hoist or on secure vehicle stands in a well ventilated area.
2.
Set vehicle emergency brake and turn the engine off.
3.
Remove the wheels and locate the drain connection on the brake cylinders.
Refer to the vehicle manufacturer's maintenance manual for their location.
4.
Turn on the air compressor (not supplied) and place its hose next to the Brake Fluid
Exchanger. (The air compressor should have a moisture filter installed on it. See
illustration on the top of page 6.)
SKU 92923
Unpacking
Plastic
Funnel
Operation
For technical questions, please call 1-800-444-3353
Used Fluid
Collection Bottles
Adapter Kit
Rubber Squeeze Dropper
REV 04/06
Page 5
Advertisement
Table of Contents
