Subscribe to Our Youtube Channel
Summary of Contents for RHEINZINK CLIPFIX 2.0
- Page 1 CLIPFIX 2.0 Operation, Installation, Maintenance, Spare Parts PROCESSING AND INSTALLATION...
-
Page 2: Table Of Contents
Please note that despite the detailed instal- lation instructions you are always personally responsible for your manner of proceeding. Maintenance and Care We have to point out, that the RHEINZINK- CLIPFIX is related to the European Guideline 2006/42/EG and in this meaning an “in- Warranty complete machine”. -
Page 3: Safety Instructions
Operation Safety Information Please refer always to below mentioned in- Safety Instructions formation in order to avoid malfunctions. General Instructions Do always use only RHEINZINK-CLIP- ■ FIX screws for clip fixing. RHEINZINK-CLIPFIX should be used only Only use original RHEINZINK-CLIPFIX with original RHEINZINK-CLIPFIX screws for ■... -
Page 4: Operation/Application
Set the FEIN-Screwdriver in steady the force with which the FEIN-Screw- ■ operation and clockwise rotation. driver is pressed against the screw. Hold the RHEINZINK-CLIPFIX with both Checking the depth of engagement ■ ■ hands. and, if necessary, adjusting the CLIPFIX Press the RHEINZINK-CLIPFIX against MAGAZIN ATTACHMENT. -
Page 5: Screwing
RHEINZINK-CLIPFIX OPERATION 1.3.1 Screwing Correct Insertion Depth How to change the Insertion Depth 1 Screw head totally screwed in flush with The insertion depth can be varied by turning the fixing clip hole the adjusting ring of the CLIPFIX MAGAZIN ATTACHMENT. -
Page 6: Installation With Clipfix
All measures and functions with H. of the different parts should fit perfectly. The RHEINZINK-clips are made of stainless You should consult an architect/planner or steel, the CLIPFIX MAGAZIN ATTACHMENT a structural engineer for calculating the wind and the CLIPFIX-Single and Collated Screws loads for your construction project. -
Page 7: Installation Sliding Clip
RHEINZINK-CLIPFIX INSTALLATION WITH CLIPFIX Installation Sliding Clip 1. Put the CLIPFIX-Tool/ screwdriver verti- cally on the slid- ing clip. Edge of the CLIPFIX-tool and edge of the 2. The left adjustment pin needs to be clip are flush. placed exactly on the centre hole 3. -
Page 8: Adjusting The Pins On The Special Tool Attachment
RHEINZINK-CLIPFIX INSTALLATION WITH CLIPFIX Adjusting the pins on the SPECIAL TOOL ATTACHMENT for installation of the fixed Clips 1. Pull up split and adjustment pin 2. Turn split pin by 90° 3. Let it click into place... -
Page 9: Installation Fixed Clip
RHEINZINK-CLIPFIX INSTALLATION WITH CLIPFIX Installation Fixed Clip 1. Put the CLIPFIX-Tool/ screwdriver verti- cally on the fixed clip. Edge of the CLIPFIX-tool and edge of the clip 2. Place the tool exactly on the right-sided are flush. halfround edge of the clip 3. -
Page 10: Maintenance And Care
■ DRIVER continuously for damages and nology. clean it with compressed air. RHEINZINK grants the original buyer for The individual movable parts should be proper function, material and workmanship ■ greased/oiled regularly. a warranty according to governmental or- The CLIPFIX-MAGAZIN ATTACHMENT ders. - Page 11 27 mm open-end screwdriver or slips off during wrench. operation. The RHEINZINK adapter sticks Grease the RHEINZINK adapter occasional- when pushing on/removing from ly, so that it can be pushed on to the autofeed the autofeed screwdriver. screwdriver smoothly.
-
Page 12: Troubleshooting/Spare Parts 9|10
RHEINZINK-CLIPFIX TROUBLESHOOTING/SPARE PARTS Error Solution The screw adjustment head Tighten the 3.0 mm hexagon screw on the is loose. screw adjustment head. The guide of the MAGAZIN Grease the guide section of the MAGAZIN ATTACHMENT sticks. ATTACHMENT. Screws are ejected. -
Page 13: Technical Support
At times, even quality products suffer oc- For technical questions about our CLIPFIX casional defects. If you should encounter a system, please contact your RHEINZINK problem with your RHEINZINK-CLIPFIX or representative. You can find your colleagues near you at www. rheinzink.com your FEIN-Screwdriver/battery, our techni- cal support is always at hand. - Page 15 RHEINZINK Sverige Tillfällavägen 15 43363 Sävedalen T: +46 31 7554500 www.rheinzink.se...
Need help?
Do you have a question about the CLIPFIX 2.0 and is the answer not in the manual?
Questions and answers