Download Print this page
UTC Fire and Security interlogix UltraSync UX-LTE-VER Installation Sheet

UTC Fire and Security interlogix UltraSync UX-LTE-VER Installation Sheet

Lte cellular module

Advertisement

Quick Links

UltraSync LTE Cellular Module Installation Sheet
Product summary
This module adds LTE cellular capability to the UltraSync Self-
Contained Hub to allow reporting of system events and
enhanced interactivity.
This module is designed for use only with the ZW-6400
Note:
Self-Contained Hub.
Figure 1: LTE cellular module
Installing the module
To install the module:
1.
Remove the cover on the back of the hub to expose the
cellular module bay.
2.
Locate the 10-pin lead inside the hub and connect the LTE
Cellular Module. Take care not to crimp any wires during
installation.
PLEASE READ THE ULTRASYNC SELF-CONTAINED HUB REFERENCE GUIDE BEFORE
USING THIS PRODUCT WHICH INCLUDES IMPORTANT SAFETY AND LEGAL
INFORMATION INCLUDING WARNINGS, WARRANTY DISCLAIMERS, AND LIMITATIONS
OF LIABILITY, AND COMPLETE INSTRUCTIONS. THE REFERENCE GUIDE IS AVAILABLE
AT: http://www.interlogix.com/intrusion/product/ultrasync-selfcontained-hub
S'IL VOUS PLAÎT LIRE LE GUIDE DE REFERENCE POUR LE HUB UltraSync AVANT
D'UTILISER CE PRODUIT QUI COMPREND LA SÉCURITÉ IMPORTANT ET JURIDIQUES
INFORMATIONS, Y COMPRIS LES AVERTISSEMENTS, GARANTIE EXCLUSIONS, ET
LIMITATIONS DE RESPONSABILITÉ ET INSTRUCTIONS COMPLETES. LE GUIDE DE
RÉFÉRENCE EST DISPONIBLE AU: http://www.interlogix.com/intrusion/product/ultrasync-
selfcontained-hub
Figure 2: LTE cellular module
3.
The LTE Cellular module includes a built in door that
allows for the antenna(s) to exit the back of the hub.
4.
Position the plastic door attached to the cellular module so
the top hooks on to the back of the hub.
5.
Press down to secure the bottom of the door. The door
should click once in place.
Installing the antenna(s)
The LTE Antenna is a two-in-one antenna designed to
Note:
optimize performance and simplify installation.
To install the antenna(s):
1.
Connect the two antenna lead wires to the connectors
located on the cellular module plastic door. Make sure to
firmly press the lead wires into the connectors for a secure
fit.
1 / 2
P/N 466-5414 • REV B • ISS 071217

Advertisement

loading

Summary of Contents for UTC Fire and Security interlogix UltraSync UX-LTE-VER

  • Page 1 UltraSync LTE Cellular Module Installation Sheet Product summary PLEASE READ THE ULTRASYNC SELF-CONTAINED HUB REFERENCE GUIDE BEFORE USING THIS PRODUCT WHICH INCLUDES IMPORTANT SAFETY AND LEGAL This module adds LTE cellular capability to the UltraSync Self- INFORMATION INCLUDING WARNINGS, WARRANTY DISCLAIMERS, AND LIMITATIONS OF LIABILITY, AND COMPLETE INSTRUCTIONS.
  • Page 2 Figure 3: Installing antenna(s) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.