Download Print this page
Unitronics UCR-ST-B5 Quick Start Manual
Unitronics UCR-ST-B5 Quick Start Manual

Unitronics UCR-ST-B5 Quick Start Manual

Advertisement

Quick Links

UCR-ST-B5 Router
The Unitronics UCR-B5 enable Unitronics PLC products to communicate via mobile networks (4G).
Highlights:
1.
1 Ethernet LAN port and 1 WAN (configurable can act as LAN)
2.
Wireless LAN access point or client to existing network.
3.
Embedded send / receive SMS messages directly from UniStream PLCs.
4.
I/O:
a.
b.
Note: UniLogic SMS embedded support from Ver. 1.29 and above.
Package Content
#
Description
1
UCR-B5 Router
2
Power cable, 2m, 4 pins terminal block
3
LTE antenna (swivel, SMA male)
4
WiFi antenna (swivel, RP-SMA male)
5
Ethernet cable (1.5 m)
6
Quick Start Guide
SIM Card
SIM Card Insertion
1
Push the SIM holder button with the SIM needle
2
Pull out the SIM holder
3
Insert your SIM card into the SIM holder
4
Slide the SIM holder back into the router
Unitronics
1 Digital Input
1 Digital Output
Quantity
Unitronics P/N
1
1
UCR-ACC-01
2
UCR-ACC-07
1
UCR-ACC-08
1
1
1

Advertisement

loading

Summary of Contents for Unitronics UCR-ST-B5

  • Page 1 UCR-ST-B5 Router The Unitronics UCR-B5 enable Unitronics PLC products to communicate via mobile networks (4G). Highlights: 1 Ethernet LAN port and 1 WAN (configurable can act as LAN) Wireless LAN access point or client to existing network. Embedded send / receive SMS messages directly from UniStream PLCs.
  • Page 2: Front View

    Ethernet ports LAN LED WAN LED Back View # Description WiFi antenna connector Reset button Mobile antenna connectors LED: Status Indication Power LED ACTION DESCRIPTION LED turned ON Router is powered up LED turned OFF Router is not powered up Unitronics...
  • Page 3: Powering Options

    4 pin power connector: Description Direction Power Ground Black Digital Input Green Digital Output White Passive Power Over Ethernet The device may also be powered by an Ethernet cable via the LAN port: (Do not use in other ports!) Unitronics...
  • Page 4 UCR-ST-B8 Input / Output Specification and Pinout Associated Description Pins Digital Input 1, 0-40VDC (Low 0-5V, High 8-40V) Digital Output 1, 0-30VDC, 300mA (sink) Mounting Use the Din Rail bracket to mount the device. Unitronics...
  • Page 5: Technical Specifications

    The information provided is subject to change without notice. The information in this document reflects products at the date of printing. Unitronics reserves the right, subject to all applicable laws, at any time, at its sole discretion, and without notice, to discontinue or change the features, designs, materials and other specifications of its products, and to either permanently or temporarily withdraw any of the forgoing from the market.