Man & Machine Slim Cool Operating Manual

• Operating Manual
B
usb
PS/2
Button functions:
Keyboard lock
1
Caps Lock LED: Also signals when keyboard is in locked mode.
2
Backlight key: Press to turn backlight on or off. Hold down key to set
3
to desired light intensity. Set light intensity will be automatically saved.
Note: Only operational on keyboards purchased with the backlight
option. A red or yellow cable label indicates backlight option is
installed.
Installation:
(See figure B.)
No software required for installation.
Cleaning Instructions
Lock keyboard. Hold down both Ctrl keys for 3 seconds to lock (1).
The lock indicator lights signal that the keyboard is locked (1 and/or 2).
Clean keyboard with approved cleaning method and approved
disinfectant or soap and water. To unlock keyboard, repeat procedure.
A
1
(See figure A.)
3
1
Approved cleaning methods
• You can wipe the product with a soft cloth that is non-abrasive like a
microfiber cloth, a wipe, a soft brush similar to a paint brush in bristle
stiffness or a sponge, but not a scourer of any sort.
• You can rinse, spray or immerse the keyboard in soap and water or
an approved disinfectant (except the USB connector).
• Can be exposed to Hydrogen Peroxide Vapor (HPV).
Approved disinfectants
• Chlorine based, up to 100,000 ppm (10%) bleach content
• Alcohol based
• Glutaraldehyde based
• Phenol based
• Formaldehyde based, up to 370,000 ppm (37%) formaldehyde content
• Oxidising, such as Hydrogen Peroxide, up to 30,000 ppm (3%) content
• Quaternary Ammonium, up to 20,000 ppm (2%) content
Restrictions
• Only clean using the cleaning methods and disinfectants described
under "cleaning instructions" in this manual.
• Please note that the USB connector must not be immersed in liquid.
• Always follow the instructions provided by the manufacturer of the
cleaning product.
• Do not use petroleum based cleaning fluids nor Acetone or abrasive
cleaning aids and products.
• Do not expose the product to temperatures below 32 ºF or above 158 °F.
(below 0 ºC or above 70 ºC.)
• Do not use temperature or pressure sterilization.
• Exposing any silicone product to the oils contained in some hand
alcohol, hand lotions and other emollients reduces their life span.
Regular cleaning helps to limit this effect. Such degradation is not
covered under warranty.
2
3 2