Advertisement
4. assembly
1 Door Wall cabINet
step 1: Carefully separate the front and back panels, allowing the side panels to unfold completely.
step 2: attach the top panel using 8x M6x16mm screws.
step 4: Insert 4 shelf supports inside the cabinet at the desired height. Place the shelf on the shelf supports.
shelf support x4
shelf
© Jack Sealey limited
top panel
Original Language Version
step 3: Turn the cabinet over. Attach the bottom panel using
11x M6x16mm screws.
APMSHFP series | Issue 1 21/10/19
Advertisement
