Advertisement
AIR POLLUTION CONTROL SYSTEM FOR FOOD PREMISES
STAINLESS STEEL KITCHEN EXHAUST HOODS
HCES-Series
HCOS-Series
HCFS-Series
HCFOS-Series
HCFDS-Series
HCFIS-Series
HCD-Series
CONTENT
A- Shipment
B- System overview
C- Hoods main features
D- Suggested specification
E- Installation guidelines
F- System test
G- Maintenance and cleaning
H- Warranty
22/54 BEACH ST KOGARAH NSW 2217 Tel 1300 903 788 Fax 1300 904 088
www.aomaus.com.au
Exhaust hood with or without supply air plenum
Exhaust hood with ozone generators with or
without air supply plenum
Exhaust hood with electrostatic filters with or
without air supply plenum
Exhaust hood with electrostatic filters, ozone
generators and with or without supply air plenum
Exhaust hood with electrostatic filters (double
pass) with or without air supply plenum
Island exhaust hood with electrostatic filters with
or without air supply plenum
Dishwasher hood
AOM AUSTRALIA
Email info@aomaus.com.au
Page 1of 5
Advertisement
Table of Contents
Summary of Contents for AOM HC Series
- Page 1 B- System overview C- Hoods main features D- Suggested specification E- Installation guidelines F- System test G- Maintenance and cleaning H- Warranty AOM AUSTRALIA 22/54 BEACH ST KOGARAH NSW 2217 Tel 1300 903 788 Fax 1300 904 088 www.aomaus.com.au Email info@aomaus.com.au...
- Page 2 (cooking process surges) and also assist in reducing exhaust rate (between 20 to 30%). The hood design focusses on the optimization of the cooking plume. Refer to AOM PDF’s file...
- Page 3 Suggested specification The kitchen exhaust hood shall be of type AOM HC_-Series. The hood shall be fitted with honeycomb filters type AOM HS-Series tested according to AS 1530.1. The hood shall be fitted with electrostatic filters type AOM AK-Series behind each honeycomb filter.
- Page 4 Page 4 of 5 System test The commissioning of the hood should be done with a representative of AOM Australia. Switch the exhaust fan on. The make-up air fan should run on the same switch. Use an anemometer to adjust the airflow for each filter by opening or closing the sliding dampers located on the exhaust spigots.
- Page 5 AOM accredited maintenance company and agree to purchase spare filters and electrostatic cells for changeover purpose. Any claim must be presented to AOM. No warranty repairs will be granted without the AOM consent in writing. If damage occurs during shipping, notify AOM immediately so that a claim can be filed.
Need help?
Do you have a question about the HC Series and is the answer not in the manual?
Questions and answers