Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Idis ID391H
Summary of Contents for Idis ID391H
- Page 3 Digital Video Recorder WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage"...
- Page 4 User’s Manual Important Safeguards 1. Read Instructions 14. Damage requiring Service All the safety and operating instructions should be read before the Unplug this equipment from the wall outlet and refer servicing to appliance is operated. qualified service personnel under the following conditions: A.
- Page 5 Digital Video Recorder WEEE (Waste Electrical & Electronic Equipment) Correct Disposal of This Product (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
- Page 6 User’s Manual...
-
Page 7: Table Of Contents
Digital Video Recorder Table of Contents Chapter 1 — Product Information................1 FEATURES ......................1 SYSTEM DIAGRAM....................1 FRONT PANEL ......................2 REAR PANEL ......................2 TURNING ON THE DVR ................... 4 TURNING OFF THE DVR ..................4 Chapter 2 — SmartGuard .................... 5 OVERVIEW ...................... - Page 8 User’s Manual Multi Channel...................... 52 Setting Up the User .................... 54 Chapter 3 — SmartSearch ..................55 OVERVIEW ......................55 FEATURES ......................55 MAIN GUI ....................... 56 SEARCH AND PLAYBACK OF RECORDED VIDEO..........58 Condition Search ....................58 Time-Lapse Search..................... 61 SAVING OF RECORDED VIDEO ................
-
Page 9: Chapter 1 - Product Information
Digital Video Recorder Chapter 1 — Product Information FEATURES Compatible with color cameras and other standard video sources Video input from network cameras (Hybrid model only) H.264, H.265 codec Video synchronization not required Simultaneous recording, multi-screen viewing, playback, remote monitoring and archiving ... -
Page 10: Front Panel
User’s Manual Hybrid Model FRONT PANEL Power Button: Turn the system on or off. Power LED: Is lit when the unit is turned on. HDD LED: Flickers when the unit accesses to the hard disk drive. DVD RW: Use to export recorded data to the DVD RW media. - Page 11 Digital Video Recorder ① ② ③ ④ ⑤ Power In Video In (BNC) Audio In Alarm In Alarm Out (Relay) ⑧ ⑨ HD SPOT Alarm Out ⑥ ⑦ ( Multi-Channel RS485 SD SPOT (Multi-Channel Display) Display) ⑩ ⑪ SD SPOT (Sequence Display) Audio Out ⑫...
-
Page 12: Turning On The Dvr
User’s Manual DP: Connect an HD (high-definition) PC monitor which supports a DVI interface. Network : Connect a CAT 5e or higher cable with an RJ-45 connector. The network settings are available at the SYSTEM – Network menu of SmartGuard. NOTE: SPOT display is not supported for network cameras. -
Page 13: Chapter 2 - Smartguard
Digital Video Recorder Chapter 2 — SmartGuard OVERVIEW SmartGuard is powerful surveillance software. It provides multiplexer functions, digital time-lapse recording and event-driven recording. SmartGuard also provides motion detection, PTZ control and various image enhancement functions. FEATURES Max. 32 channels ... -
Page 14: Main Gui
User’s Manual MAIN GUI 16-Channel / 32-Channel Model ① ② ③ ④ Utility Buttons Monitoring Screen Menu Button System Status ⑤ ⑧ ⑥ ⑦ PTZ Control Panel Alarm Control Panel Screen Mode Buttons Camera Buttons ⑨ ⑩ POS Panel Log Panel ... - Page 15 Digital Video Recorder – Setup: Displays a SmartGuard Setup screen. It allows you to change the settings of SmartGuard program. – About: Displays the information of the installed cards, driver, software, hard disk drive, OS and MAC address on the system. –...
-
Page 16: Screen Group Edit
User’s Manual – System shutdown: Shuts down the system. System Status: Displays user ID, date and time, the remaining hard disk space and the type of hard disk usage. Clicking the right mouse button allows you to change the time. If you change the time, the SmartGuard program restarts and recording stops during the time. -
Page 17: Ptz
Digital Video Recorder Mount Type: Chooses a position that the camera is mounted. The available Screen Type changes depending on this setting. Main View: Displays the original fisheye dewarping video. When ePTZ is on, you can control Pan, Tilt and Zoom by clicking the left/right mouse button. The Main PiP is selected as a default. -
Page 18: Smartguard Setup
User’s Manual SmartGuard SETUP Load: Loads a saved setting and apply it to the DVR. Save: Saves the current setting. Default: Loads the factory default setting and apply it to the DVR. Setting Up the System... -
Page 19: Set Up General
Digital Video Recorder Set up General Location: Enter a DVR name. If you do not have a keyboard connected to the unit, clicking the keyboard icon will display a virtual keyboard on which you can type by clicking the letters. ... -
Page 20: Network
User’s Manual Network Transmit Method – Frame Rate, Image resolution: Set the transmit speed and resolution of video to be transferred to remote system from the DVR. Transmit speed is the number of images transferred during one second. The higher the transmit speed is, the more images are transferred. - Page 21 Digital Video Recorder Network Service – FEN Server Info.: Clicking the Set up… button allows you to enter the FEN server information. Server, Port: Enter the IP address (or domain name) and port number of the FEN server. –...
- Page 22 User’s Manual Dual Display Set up dual display: Sets the mode for the additionally connected monitor (secondary monitor). 1. Main Monitor: SmartGuard & SmartSearch / Secondary Monitor: Extended spot 2. Main Monitor: SmartGuard / Secondary Monitor: SmartSearch & Secondary Live Screen 3.
-
Page 23: System Alert
Digital Video Recorder System alert Clicking each tab of S.M.A.R.T., Stop recording and Login Fail (3 times) and enabling each function causes the system alert as follows: S.M.A.R.T. tab – Set up alert, S.M.A.R.T. Log: Causes the system alert when S.M.A.R.T. log occurs. This is supported only when the installed hard disk drives support S.M.A.R.T. - Page 24 User’s Manual – S.M.A.R.T. Log: Displays the list of S.M.A.R.T. log. – Delay time for the first inspection after system starts: Set the standby time until the system performs the first inspection after setting the function. – Inspection Interval: Set the inspection interval. –...
- Page 25 Digital Video Recorder – Email: Sends an email when system alert occurs. Select a sender and recipient from the drop-down menu below the Set up... button and enter the message. If any sender or recipient is not registered, click the Set up... button. ...
-
Page 26: Time Sync
User’s Manual Time sync In general, each DVR system may have a different time because of the accuracy of its internal clock. The Time Synchronization function synchronizes the time between a DVR and any time server when they are networked. Any DVR can run as a time server. -
Page 27: Osd
Digital Video Recorder You can set up to display OSD information on the image when monitoring video on a main monitor. OSD (On Screen Display) information includes camera title, time, event detection block, etc. Enable all camera’s OSD: Enables OSD display for all cameras. If you disable it, you can enable or disable OSD display for each camera by clicking each camera button. -
Page 28: Archive
User’s Manual Archive You can back up recorded video to a hard disk drive and eSATA. NOTE: Use a hard disk drive formatted beforehand when you back up data to hard disk drives. Archive method: Manual and automatic archives are supported. –... - Page 29 Digital Video Recorder Total Capacity: Displays the total capacity of the device. Available Storage: Displays the number of storages that is available for archiving. The storage is the basic unit of 256MB for the database used by the DVR. ...
-
Page 30: System Authority
User’s Manual System authority Use local login: Login procedure is required to run SmartGuard program. – Monitoring Without Login: It is allowed to monitor video even while you are logged out. – Use password expiration: Set the password expiration period. If the password has not been changed during the password expiration period, you will be allowed to change the password after you log on. -
Page 31: Setting Up The Camera
Digital Video Recorder Setting Up the Camera Non-Hybrid Model Channel 1 to Channel 32: Indicates the camera number. buttons are supported for 32-channel model only. − Description: Enter a camera name. Hide Image: Hides the image of the selected camera on the monitor. The selected camera will not be displayed on the monitor, however, the images from the camera will be recorded while in the record mode. - Page 32 User’s Manual Set Privacy Area: Set up the privacy area on the image. The selected area set as Privacy Area will NOT be displayed either in the live mode or playback mode. The DVR will display the selected areas in black, and also does NOT react to events detected within the area set as Privacy Area.
-
Page 33: Channel Status
Digital Video Recorder Hybrid Model Channel status It displays camera information such as IP address, video input type, etc. -
Page 34: Assign Camera
User’s Manual CH.: Displays a camera number. Name: Displays a camera name set in the DVR. IP address: Displays a camera’s IP address (supported for a network camera only). MAC Address: Displays a camera’s MAC address (supported for a network camera only). ... - Page 35 Digital Video Recorder Scan network camera: Allows you to search for network cameras. – Protocol: Select the protocol or manufacturer of the device to scan. – Scan mode: Select the scan mode. Clicking the Start scan button displays the results in the list. If the IP address range of the camera is different from that of the DVR, the DVR considers the IP address invalid.
- Page 36 User’s Manual – Add devices: Select the cameras to register by checking beside each camera name in the list. Click the Add devices button. Device Name, IP Address: Displays the name and IP address of the selected camera. The name will be updated automatically depending on the settings of the camera.
-
Page 37: Channel
Digital Video Recorder Channel It allows you to set up cameras. Channel 1 to Channel 32: Indicates the camera number. buttons are supported for 32-Channel model only. Description: Enter a camera name. Selecting Device Name Sync automatically applies the name set in the camera to the DVR (supported only for network cameras which use the iNEX Series protocol). -
Page 38: Setting Up The Alert
User’s Manual Setting Up the Alert Non-Hybrid Model... - Page 39 Digital Video Recorder Hybrid Model...
-
Page 40: Alarm Out
User’s Manual Alarm Out You can set up the DVR to activate alarm out of the device connected to the DVR’s alarm out port. 1 to 32: Displays alarm out number. See Appendix 4 — Connector Pin Outs for details about the alarm out buttons are supported for 32-Channel model only. -
Page 41: User Define Alarm Out
Digital Video Recorder User Define Alarm Out You can set up the DVR to activate user define alarm out when an event occurs. 1 to 32: Displays alarm out number. buttons are supported for 32-Channel model only. Use Remote Port: Set the user define alarm out via remote port. ... -
Page 42: Netcam Alarm Out
User’s Manual NetCam Alarm Out You can associate alarm out of a network camera with events if the network camera supports alarm out. This is supported for the hybrid model only. 1 to 32: Displays the camera number. buttons are supported for 32-Channel model only. ... -
Page 43: Email
Digital Video Recorder Email You can set up email address book. Sender address book: Enter the email address and SMTP server address and port number. Select a type if the SMTP server uses the type of encrypted connection. Check the Login box if you want to connect to the SMTP server that requires login procedure, and enter the ID and password for login. -
Page 44: Callback
User’s Manual Callback You can set up callback address book. Server address: Enter the IP address of the callback server and click the Add button. - Page 45 Digital Video Recorder Push You can set up push server. Server address: Enter the IP address of the push server.
-
Page 46: Setting Up The Event
User’s Manual Setting Up the Event Non-Hybrid Model... - Page 47 Digital Video Recorder Hybrid Model Ignore time to event: Only the first detected event is notified by log, channel association or action association and the same type of other events detected during the dwell time will not be notified. ...
- Page 48 User’s Manual Action association: Displays actions to be done when an event occurs. Clicking the Set up... button allows you to change the settings. Non-Hybrid Model Hybrid Model...
-
Page 49: Motion
Digital Video Recorder – Email: Sends an email when an event occurs. Select a sender and recipient from the drop-down menu below the Set up... button and enter the message. Enabling Attach the event image file attaches an event detected image file (.JPG) to the email. -
Page 50: Object
User’s Manual Set up motion detection – Set up zone...: Set up the motion detection zone. This is not supported for network cameras and the DVR uses the settings of a network camera. The setup screen is made up of a grid. First, click the Draw or Erase radio button and select a tool to use, and then set up the motion detection area on the image. -
Page 51: Video Loss
Digital Video Recorder Set up object detection – Set up zone...: Set up the object detection zone. This is not supported for network cameras and the DVR uses the settings of a network camera. The setup screen is made up of a grid. First, click the Draw or Erase radio button and select a tool to use, and then set up the object detection area on the image. -
Page 52: Alarm In
User’s Manual – Detect Flare: The DVR checks the brightness of the lens and considers the flare on the images as a video loss event (for example, light is flashed at the lens). Set the flare level by holding down and dragging the pointer. The higher the percentage, the more sensitive it is. -
Page 53: Text In
Digital Video Recorder Text In You can set up text in event. 1: Displays text-in device number. Clicking each button allows you to change text-in event settings for each camera. Enable: Enables text-in event function. When the DVR detects text-in data from a text in device, it considers it as an event. -
Page 54: Audio Detection
User’s Manual Audio Detection You can use the audio detection event of the network camera in the DVR if the network camera supports the audio detection event. This is supported for hybrid products only. Enable all : Click Enable all to select all of the camera numbers. ... -
Page 55: Setting Up The Schedule
Digital Video Recorder Enable all : Click Enable all to select all of the camera numbers. 1 to 32: Displays the camera number. Clicking each button allows you to set up the tripzone event in the DVR for each network camera. - Page 56 User’s Manual Recording Setup You can set up recording for each camera. BNC Cameras...
- Page 57 Digital Video Recorder Network Cameras Record audio: Records audio while the DVR records video. The DVR provides two types of audio input, M icrophone and Line-in. Microphone is for an unamplified source while Line-in is for an amplified source. ...
-
Page 58: Schedule Setup
User’s Manual After hour: Sets the after hour recording schedule. The DVR records video with different settings during the hours. – Enable: Enables after hour recording. – IPS: See the explanation of Time lapse recording (not supported for network cameras). –... -
Page 59: Setting Up The Spot
Digital Video Recorder Event recording: Enable or disable event recording. When the event recording is enabled, the event type is displayed in the timetable below (m: motion detection, o: object detection, v: video loss, a: alarm in, u: user define alarm in, n: network alarm in or NetCam alarm in, t: text in, d: audio detection, p: tampering, z: tripzone, E: all events). -
Page 60: Multi Channel
User’s Manual Multi Channel You can set up the multi-channel SPOT display. The DVR displays video sequentially or displays monitoring video of SmartGuard. Set up HD multi spot: Set the display on the monitor connected to the HD SPOT (Multi-Channel Display) port of the DVR rear panel. - Page 61 Digital Video Recorder Sequence You can set up the sequence SPOT display. The DVR displays video sequentially. 1 ~8: Displays the number of monitors connected to the SD SPOT (Sequence Display) port of the DVR rear panel. Clicking each button allows you to change the settings of sequence display on the monitors. ...
-
Page 62: Setting Up The User
User’s Manual Setting Up the User Add user, Edit user: Allows you to add or edit user information. Only the administrator level user can edit the user’s information and their authority setup. – User ID, Password, Confirm password: Set the user ID and password. –... -
Page 63: Chapter 3 - Smartsearch
Digital Video Recorder Chapter 3 — SmartSearch OVERVIEW SmartSearch is a powerful tool for SmartGuard. It features playback and search functions for recorded data and consists of Playback Screen, Timetable, Status Window and Utility Buttons. Each area displays or controls recorded (Menu) button and SmartSearch menu of SmartGuard to get into the SmartSearch mode. -
Page 64: Main Gui
User’s Manual MAIN GUI 16-Channel / 32-Channel Model ① ② ③ ④ Playback Screen Menu Button System Status Playback Panel ⑤ ⑧ ⑥ ⑦ Utility Buttons Screen Mode Buttons Panorama Playback Panel Event Search Panel ⑨ ⑩ ⑪ ⑫ Data Source Camera Buttons Playback Buttons Jog Shuttle... - Page 65 Digital Video Recorder – Help: Displays the electronic file of user’s manual. – Exit: Finishes the system. System Status: Displays user ID and the recorded time of playback video. Playback Panel: Displays the current playback image. Panorama Playback Panel: Displays the panorama playback image. It displays images from one camera image by image in multi-screen mode.
-
Page 66: Search And Playback Of Recorded Video
User’s Manual SEARCH AND PLAYBACK OF RECORDED VIDEO Condition Search Select the Event Search tab. The following setup screen appears. Designate the find range and set up the search condition in the Motion Detection, Event, Text-In, Alarm-In tab or User Define Alarm In. ... - Page 67 Digital Video Recorder Channel: Select a camera number. Motion Detection Zone: Set up the detection zone using the area setup icons. First, click the Draw or Erase radio button and select one of four tools to use, and then set up the detection area on the video screen.
- Page 68 User’s Manual Event Select the Event tab and then a camera number in the Channel buttons below. Clicking the (Find) button after setting up the search condition displays the list of event recorded video of the selected camera. Netcam alarm in, audio detection, tampering and tripzone is supported for hybrid products only.
-
Page 69: Time-Lapse Search
Digital Video Recorder Alarm-In Select the Alarm-In tab and then a device number in the Channel buttons below. Clicking the (Find) button after setting up the search condition displays the list of recorded video which are associated with the selected alarm-in device. - Page 70 User’s Manual ① Current Playback Date/Time: Indicates the video time for the current playback location on the timetable. ② Recorded Period: Displays the date and time period of the recorded data. Clicking anywhere in the empty space and dragging it to the left or right moves to the earlier or later date or time. Every clicking the right mouse button on the timetable zooms the record timetable in with three levels;...
- Page 71 Digital Video Recorder Bookmark Search Bookmarking a specific time in the Bookmark panel makes it easier to search for video of the specific time in the future. Clicking the button allows you to bookmark the current playback time and clicking the button deletes the bookmark.
-
Page 72: Saving Of Recorded Video
User’s Manual SAVING OF RECORDED VIDEO NOTE: The user can save recorded video when the user has an authority with External Save. The External Save option should be selected during the SmartGuard – USER menu. Refer to Chapter 2 — SmartGuard, Setting Up the User for details. -
Page 73: Clip Player
Digital Video Recorder Calc Size: Calculates and preview the size of file to save. Clicking the Start button starts saving. Clip Player NOTE: Refer to the section (p. 58 for playing back the saved video. Set Privacy Area After selecting Set Privacy, clicking the Set Area button displays the following dialog window. For designating privacy area, select Draw and set the area by choosing one from Dot/Line/Rectangular/Fill. - Page 74 User’s Manual NOTE: Proper image display depends on the display settings of your PC. If you are experiencing display problems, click the right mouse button on the background screen and select Properties → Settings then set the Color quality to “32 bit”. Then select Advanced → Troubleshoot, and then set the Hardware Acceleration to “Full”. Please make sure that DirectX version 9.0 or higher has been installed if the display problem continues.
- Page 75 Digital Video Recorder : Sets up the Clip Player properties. − Fisheye Dewarping: Controls Fisheye Dewarping. For more details, Please refer to the following the Fisheye Dewarping below. − Print: Prints the current image. − Frame Info: Displays Channel, Title, Time, Type, Size and Resolution information about the image.
- Page 76 User’s Manual NOTE: If the VGA card or monitor does not support 800x600 video resolution, Full Screen might not display properly. If this happens, press the ESC key on your PC keyboard to return to the normal screen mode. Click the slider bar and move it left or right to move through the video clip. Placing the mouse cursor on an image and clicking will cause that image to display full frame.
-
Page 77: Audio Playback
Digital Video Recorder AUDIO PLAYBACK Checking Audio Recording Configuration 1. Click the SCHEDULE menu on the main GUI of SmartGuard. 2. Click Recording Setup tab. 3. Check that Record Audio is enabled for each camera. Playing Recorded Audio 1. Selecting a camera screen in the playback screen displays the button beside the camera title. -
Page 78: External Saving
User’s Manual External Saving Click the (External Saving) button at the top right of the SmartSearch. Eject, Close: Ejects the disk from the drive or closes the drive door. Add File, Add Folder: Adds a file or folder to burn on the CD/DVD. ... -
Page 79: Appendix 1 - Network Setup (Lan)
Digital Video Recorder Appendix 1 — Network Setup (LAN) (Menu) button → Setup menu → SYSTEM – Network menu on the Run the SmartGuard program and click the main GUI. Setting Internet Protocol (TCP/IP) Properties Select Obtain an IP address automatically or Use the following IP address depending on your network environment. - Page 80 User’s Manual Setting FEN Function When FEN function is enabled, it is not necessary to set up port forwarding manually. However, remote connection to the DVR might not be available depending on the network connection environment of the DVR or remote system when the FEN function is enabled.
-
Page 81: Appendix 2 - Webguard
Enter ID and PASSWORD and click the [LOGIN] button. You will need to enter the DVR IP address in the DVR ADDRESS field when running the IDIS Web program by entering http://web.idisglobal.com Selecting the Use FEN Service option allows you to enter the DVR name registered on the FEN server instead of the IP address. - Page 82 User’s Manual NOTE: When running IDIS Web in the Microsoft Windows Vista or later operating system, it is recommended to start Internet Explorer with elevated administrator permissions. Click the right mouse button on the Internet Explorer icon and select the Run as administrator option from the context menu. Otherwise, some functions of the WebGuard might be limited to use.
- Page 83 Digital Video Recorder ⑧ Click to switch over to Web Search mode. ⑨ Shows login information. ⑩ Select the camera you wish to monitor. Use the arrow buttons to navigate to the previous/next camera group. ⑪ Used to control a PTZ camera at a remote location. ⑫...
- Page 84 NOTE: While in Web Search mode, connection to remote locales will terminate automatically after 30 minutes of inactivity. ① Press x to terminate IDIS Web. ② Place the mouse pointer on the IDIS logo to check IDIS Web's version. ③ Displays time information of the video recording from the remote DVR. ④ Select the desired mode.
- Page 85 Digital Video Recorder ⑮ Use the calendar to search for video recordings by specific dates. Dates containing video recordings are highlighted in light blue. Selecting a date containing video recording data loads the earliest recording from that date(paused state). Select date is highlighted in orange. 16 Select TimeLapse to enable time lapse search mode and search/play back video recordings in chronological order.
- Page 86 User’s Manual...
-
Page 87: Appendix 3 - Text-In Query
Digital Video Recorder Appendix 3 — Text-In Query Set up the find condition of text-in. Case Sensitive: Distinguishes between capital letter and small letters entered in the Name box. Name: Enter the text to find. Comp: Enter the comparison operator. ... - Page 88 User’s Manual Query Example II 123456789012345678901234567890123456789012345678901234567890 Item Unit price amount ================================================== Coke 2.20 | 1(s) 2.20 Fanta 2.20 | 1(s) 2.20 Hotdog 3.50 | 3(s) 10.50 Pepsi 1.95 | 1(s) 1.95 ================================================== total : $ 16.85 Thank you~~ In the above text-in data, you can find that the comparison value is located at 17 (Unit price, $ mark will be ignored (amount) characters (including spaces) from the left, but the value of amount automatically), 28...
-
Page 89: Appendix 4 - Connector Pin Outs
Digital Video Recorder Appendix 4 — Connector Pin Outs SPOT Monitor Output (Sequence Display) Alarm Input 16-Channel Model Connector Connector S1 (Sensor 1) S9 (Sensor 9) S2 (Sensor 2) S10 (Sensor 10) S3 (Sensor 3) S11 (Sensor 11) S4 (Sensor 4) S12 (Sensor 12) G (Ground) G (Ground) - Page 90 User’s Manual Alarm Output Relay Output Connector 16-Channel Model 32-Channel Model NC (Normal Close) NO (Normal Open) COM (Common) GND (Ground) TTL Output 16-Channel Model Connector Connector AOUT1 (Alarm Out 1) AOUT2 (Alarm Out 2) AOUT3 (Alarm Out 3) AOUT4 (Alarm Out 4) AOUT5 (Alarm Out 5) AOUT6 (Alarm Out 6) AOUT7 (Alarm Out 7)
- Page 91 Digital Video Recorder 32-Channel Model Connector Connector AOUT1 (Alarm Out 1) AOUT2 (Alarm Out 2) AOUT3 (Alarm Out 3) AOUT4 (Alarm Out 4) AOUT5 (Alarm Out 5) AOUT6 (Alarm Out 6) AOUT7 (Alarm Out 7) AOUT8 (Alarm Out 8) GND (Ground) GND (Ground) AOUT9 (Alarm Out 9) AOUT10 (Alarm Out 10)
- Page 92 User’s Manual...
-
Page 93: Appendix 5 - Troubleshooting
Digital Video Recorder Appendix 5 — Troubleshooting Following are some frequent problems and solutions related to the DVR. Read this section before calling the dealer or installer. Problem: There is no image on the screen. Solution: Check the camera cables. If the Video Loss image is displayed, something is wrong with the camera cable or power. - Page 94 User’s Manual...
-
Page 95: Appendix 6 - Specifications
Digital Video Recorder Appendix 6 — Specifications 16-Channel Model VIDEO Signal Format NTSC or PAL (programmable) Composite: 1 Vp-p, 16 looping, auto-terminating Video Input Network camera: max. 16 channels (Hybrid model only) Monitor Outputs One HDMI, One DP, One VGA, 10 SPOT (One HD SPOT, 9 SD SPOT) 704x480 (4CIF), 704x240 (2CIF), 352x240 (CIF) (704x576, 704x288, 352x288 for PAL) Recording Resolution Max. - Page 96 User’s Manual STORAGE Primary Storage SATA hard disk drive (Expandable up to 5) Secondary Storage eSATA HDD Backup Storage DVD RW GENERAL Dimensions (W x H x D) 17.3" x 7.0" x 18.2" (440mm x 177mm x 462mm) Unit Weight 35.7 lbs.
- Page 97 Digital Video Recorder 32-Channel Model VIDEO Signal Format NTSC or PAL (programmable) Composite: 1 Vp-p, 32 auto-terminating Video Input Network camera: max. 32 channels (Hybrid model only) Monitor Outputs One HDMI, One DP, One VGA, 12 SPOT (2 HD SPOT, 10 SD SPOT) 704x480 (4CIF), 704x240 (2CIF), 352x240 (CIF) (704x576, 704x288, 352x288 for PAL) Recording Resolution Max.
- Page 98 User’s Manual STORAGE Primary Storage SATA hard disk drive (Expandable up to 5) Secondary Storage eSATA HDD Backup Storage DVD RW GENERAL Dimensions (W x H x D) 17.3" x 7.0" x 18.2" (440mm x 177mm x 462mm) Unit Weight 36.8 lbs.