Advertisement
4. OPERATION
4.1.
INSERTING RIVET NUTS
4.1.1.
Adjust the working stroke by rotating the sheath anticlockwise to lengthen the working stroke and clockwise to shorten the working
stroke.
Note: Model No: AK3985.V2 has a stroke scale to gauge optimum compression (see Fig.1). Only work when the scale indicates
6mm and below.
4.1.2.
Retighten the knurled lock ring.
4.1.3.
Screw a nut onto the mandrel, until it is level with the end of the nut.
4.1.4.
Insert the riveter into the hole and close the handles to rivet the nut. The rivet needs to shorten by approximately 6mm.
4.1.5.
Rotate the thumbwheel anticlockwise to remove the mandrel from the rivet nut.
fig.1
4.2.
CHANGING THE MANDREL (REFER TO FIG.2)
4.2.1.
Use the tool to remove the mandrel nut, remove the sheath and its washer.
4.2.2.
Place the spanner supplied over the mandrel and use it to hold down the tube to engage and hold the hex nut. Use another
spanner to undo the mandrel (anticlockwise).
4.2.3.
Screw in the new mandrel, refit the sheath, its washer and the mandrel nut, ensure they are all tight before use.
5. TROUBLESHOOTING
5.1.
If the mandrel can not be easily removed from a rivet, DO NOT try to force it as it could cause damage to the riveter. Use a
spanner to rotate the mandrel anticlockwise to release it from the rivet.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
fig.2
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
AK3984.V2 AK3985.V2 Issue 2 (4) 07/01/2020
Advertisement
