Specifications - Yard Machines MTD1400K Operator's Manual

MAINTENANCE INSTRUCTIONS
Before replacing the top cover assembly ensure that the
V-cutter is positioned as shown in (Fig. 13) Replace the
top cover assembly and secure tightly the caging knobs.
If caging Knobs are not tight the motor will not start due
to the motor lock out switch not bein activated.
CLEANING After use, always wipe clean the outside of
the Shredder to remove any build up of material with a
damp cloth. Clean the inside of the cutting chamber and
remove any left over material, Do not hose down with
water.
IMPORTANT: Before replacing top cover assembly
ensure that the V-cutter is positioned as shown in (Fig.
13).
Fig. 13
Replace the top cover assembly together with the top
cover screw knob ensuring this is tight. If the top cover
screw knob is not tight the motor will not start due to the
motor lock out switch not being activated.

SPECIFICATIONS

MODEL NO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MTD1400K
Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120V~, 60Hz, 14Amp
Hopper Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .394x270x200mm (15-1/2"x10-5/8"x7-7/8")
No Load Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 300 min -1 /RPM
Net Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77 Lbs (35 Kg)
11