Table of Contents
Advertisement
Quick Links
1
APPLICATION ................................................................................ 3
2
DESCRIPTION (FIG A) ................................................................... 3
3
PACKAGE CONTENT LIST ............................................................ 3
4
SYMBOLS ....................................................................................... 3
5
GENERAL POWER TOOL SAFETY WARNINGS ......................... 4
5.1
Working area .......................................................................................................... 4
5.2
Electrical safety ..................................................................................................... 4
5.3
Personal safety ...................................................................................................... 4
5.4
Power tool use and care ........................................................................................ 5
5.5
Service .................................................................................................................... 5
6
SAW ................................................................................................. 5
7
CHARGERS .................................................................................... 6
7.1
Batteries ................................................................................................................. 6
7.2
Chargers ................................................................................................................. 6
8
8.1
Charger indications (Fig. 1) ................................................................................... 7
8.2
Removal / insertion of battery (Fig. 2) .................................................................. 7
8.3
Battery capacity indicator (Fig. 3) ......................................................................... 7
9
ASSEMBLY ..................................................................................... 8
9.1
Install or remove the saw blade (Fig 4) ................................................................ 8
10
OPERATION.................................................................................... 8
10.1
Switch on/off (Fig. 5).............................................................................................. 8
10.2
To change angle of the pivot shoe assembly (Fig. 6) .......................................... 8
10.3
To change position of the pivot shoe assembly (Fig 7) ...................................... 8
10.4
LED work-light (Fig. 8) ........................................................................................... 9
11
GENERAL OPERATING INSTRUCTIONS ..................................... 9
11.1
General cutting ...................................................................................................... 9
11.2
Plunge cutting ........................................................................................................ 9
Copyright © 2017 VARO
POWDP2510
P a g e
| 1
EN
www.varo.com
Advertisement
Table of Contents
Related Manuals for Power Plus POWDP2510
Summary of Contents for Power Plus POWDP2510
-
Page 1: Table Of Contents
POWDP2510 APPLICATION ................3 DESCRIPTION (FIG A) ..............3 PACKAGE CONTENT LIST ............3 SYMBOLS ..................3 GENERAL POWER TOOL SAFETY WARNINGS ......4 Working area ......................4 Electrical safety ..................... 4 Personal safety ...................... 4 Power tool use and care ..................5 Service ........................ - Page 2 POWDP2510 11.3 Metal cutting ......................10 CLEANING AND MAINTENANCE ..........10 12.1 Cleaning ....................... 10 TECHNICAL DETAILS ..............10 NOISE .................... 10 WARRANTY .................. 10 ENVIRONMENT ................11 DECLARATION OF CONFORMITY ..........12 Copyright © 2017 VARO P a g e...
-
Page 3: Application
POWDP2510 RECIPROCATING SAW 20V (NO ACCU) POWDP2510 1 APPLICATION The reciprocating saw is designed for cutting the wood, iron, nonferrous metals and plastics, using a standard saw blade. Not suitable for professional use. WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. -
Page 4: General Power Tool Safety Warnings
POWDP2510 Ambient temperature 40°C Wear noise protection max. (only for battery) Use battery and charger only Wear eye protection in closed rooms Wear a mask In dusty Do not expose charger and conditions battery pack to water Do not incinerate battery... -
Page 5: Power Tool Use And Care
POWDP2510 medication. A moment of inattention when operating a power tool may result in serious personal injury. Use safety equipment. Always wear eye protection. Using safety equipment such as a dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed will reduce the risk of personal injury. -
Page 6: Additional Safety Instructions For Batteries And Chargers
POWDP2510 Before switching on the tool, be sure the blade in not contacting the work piece. Keep hands away from moving parts and on the top surface of the work piece. Do not place hands below work surface while saw is operating. -
Page 7: Charging And Insertion Or Removal Of Battery
POWDP2510 Do not expose to water. Do not open the charger. Do not probe the charger. The charger is intended for indoor use only. 8 CHARGING AND INSERTION OR REMOVAL OF BATTERY Charger indications (Fig. 1) Connect the charger to the power outlet socket ... -
Page 8: Assembly
POWDP2510 9 ASSEMBLY Install or remove the saw blade (Fig 4) WARNING: Before making any adjustments ensure the saw is switched off with the lock-off button in the centre position and remove the battery from the saw. To avoid accidental start, check to make sure lock-off button is not engaged prior to plugging in tool and you finger is not touching the on/off switch trigger. -
Page 9: Led Work-Light (Fig. 8)
POWDP2510 10.4 LED work-light (Fig. 8) The LED work light (3) can light prior to motor running if you press the switch lightly, which keep the work area to be lighted for checking clearly at first, and it lights also during your operation. - Page 10 POWDP2510 saw forward to lower the blade onto the cut line. Continue this motion until the saw blade is perpendicular to the work piece. 11.3 Metal cutting Blades specifically designated for cutting metals must be used for this purpose. You may use light oil as a coolant when cutting metal, this will prevent overheating of the blade, help the blade cut faster, and promote longer blade life.
- Page 11 POWDP2510 plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects resulting from maltreatment, accidents or alterations; nor the cost of transportation. Damage and/or defects resulting from inappropriate use also do not fall under the warranty provisions.
- Page 12 POWDP2510 17 DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, Product: Reciprocating saw Trade mark: POWERplus Model: POWDP2510 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards.
Need help?
Do you have a question about the POWDP2510 and is the answer not in the manual?
Questions and answers