Duo Mini User Instructions Duo Mini User Information June 2017 Contents Introduction to the Duo Mini chair Duo Mini Chair Guidelines for Best Practice Questions and Concerns The User Instructions General Operation of the Duo: What is Tilt-in-Space? Operating the Tilt-in-Space and Elevating...
What is the Duo Mini? The ability of a seated person to function The purpose of the Duo Mini seating efficiently and perform activities depends on system is to provide the ultimate in their ability to adopt the appropriate positioning and postural management for posture.
Duo Mini Chair Guidelines for Best Practice To ensure good practice when considering purchasing a Duo Mini and effective use Options post purchase we advise that the following guidelines are considered: Different seat widths: 200, 250, 300 or 350mm •...
Key to the Duo Mini is the ability to effect the tilt-in-space without over exertion by the carer or indeed the user through the use of a battery powered motor.
625mm an extra waterfall cushion is required to fill the increased back height space. Always check that there is enough cushioning when the back of the Duo Mini is reclined as this can reveal a gap on the higher back heights. Use the extra waterfall cushion to fill this gap.
Footboard Height Adjustment Back Angle Adjustment It is important to try and support the whole The angle of the back is adjustable in foot from the heel to the toes with the thighs relation to the seat in order to ensure evenly distributed on the seat cushion to comfort and facilitate correct positioning.
Seat Length Adjustment Seat Width Adjustment The seat width depends on the user’s hip To ensure that the correct seat length is width and will vary according to the level of achieved for each user a clearance of 25mm pelvic support required. If substantial support or one inch between the front of the seat is needed, the chair arms should fit firmly cushion and the calf is desirable when the...
Headrest Angle Adjustment Arm Height The headrest tilts backwards or forwards, The user’s elbow should rest comfortably supporting the user’s head as required. on the armrest, high enough to provide support without having shoulders raised or Using the small spring-loaded lever on •...
Positional Headrest Adjustment The top section of the headrest is designed To move vertically, loosen the black • to adjust forward and backward to facilitate spring-loaded levers on each lateral precise positioning of the head to support support at the rear of the chair. Rotate the user.
Pommel (optional) Lap-Belt and Pelvic Positioner The pommel simply slides on and off from Lap-Belt the front of the seat module. To use the Lap-Belt effectively, undo the • To remove, firmly take hold of the buckle joining the two halves of the strap •...
The user is at risk if the Lap-Belt is not • Warnings properly specified and adjusted to their particular requirements. The user is at risk if the Duo Mini is not • Users should be regularly checked and • properly configured to their particular continuously supervised when using the physique and requirements.
UK +44 (0) 1440 705352 to discuss further. Alternatively, if you purchased your chair from a Kirton distributor in the first instance please contact your point of reference there. If your call concerns a specific seating product or item of furniture please have ready your sales order number before you telephone.
Need help?
Do you have a question about the Duo Mini and is the answer not in the manual?
Questions and answers