Advertisement
Quick Links
Commissioning
• Rotate the ceiling cover clockwise over the fixing
bracket to secure in place. See Fig. 3 overleaf.
• It is recommended to secure product cable to
suspension cables using cable ties.
Fitting/replacing bulbs
• The LED module in this fitting is non-replaceable.
We recommend cleaning with a soft dry cloth.
Do not use solvents or abrasive cleaners as these could damage the finish.
Recycling advice
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for recycling advice.
Safety information
Live Voltages may be present in this unit even when turned off or when completely disconnected. For your safety,
always switch off the supply before changing lightbulbs, or cleaning.
www.saxbylighting.com
• Ensure the weight of the product is supported on the
steel cables and not the electrical flex.
• Replace fuse or circuit breaker and switch on. Your
light is now ready for use.
Iss.1 23062016
Saxby Lighting Ltd. BH23 3PE
Instruction leaflet
Prism Pendant
70426
Advertisement
Summary of Contents for Saxby Lighting Prism Pendant
- Page 1 Instruction leaflet Commissioning • Rotate the ceiling cover clockwise over the fixing • Ensure the weight of the product is supported on the bracket to secure in place. See Fig. 3 overleaf. steel cables and not the electrical flex. Prism Pendant • It is recommended to secure product cable to • Replace fuse or circuit breaker and switch on. Your suspension cables using cable ties. light is now ready for use. 70426 Fitting/replacing bulbs • The LED module in this fitting is non-replaceable.
- Page 2 Installation Thank you for purchasing this light fitting. Please read the instructions carefully before use to ensure safe and Fig. 1 satisfactory operation of this product. Please retain these instructions for future reference. Existing fittings must be completely removed before installation of a new product. Before removing the existing fitting, carefully note the position of each set Warning of wires. • See Fig. 1. This product has two outer ceiling fixing This is a Class 1 product and must be earthed. Waste electrical products should not be disposed of points. Check and measure the distance for the fixing with household waste. Please recycle where facilities holes so the fixing cables hang vertically. Optimum Please read these instructions carefully before exist. Check with your local authority or retailer for distance between suspension cables is 1100mm. commencing any work.
Need help?
Do you have a question about the Prism Pendant and is the answer not in the manual?
Questions and answers