Remote Control Operation - Yamaha HTR-5840 Owner's Manual

■ Remote control operation

CODE SET TRANSMIT
SYSTEM
POWER POWER STANDBY POWER
TV AV
CD MD/CD-R TUNER SLEEP
DVD DTV/CBL V-AUX MULTI CH IN
AMP
VCR AMP
TV VOL TV CH VOLUME
TV MUTE TV INPUT
Press AMP to select the AMP mode, then press
one of the sound field program buttons
repeatedly to select the desired program.
The name of the selected program appears in the front
panel display.
AMP
VCR V-AUX DTV/CBL
SP
A
TV Sports
Program name
y
Choose a sound field program based on your listening preference,
and not purely on the name of the program itself.
Notes
• When you select an input source, this unit automatically selects
the last sound field program used with that source.
• Sound field programs cannot be selected when MULTI CH
INPUT is selected.
• Sampling frequencies higher than 48 kHz (except for DTS 96/
24 signals) will be sampled down to 48 kHz, then sound field
programs will be applied.
TV VOL TV CH VOLUME
TV MUTE TV INPUT
MUTE
STEREO MUSIC ENTERTAIN MOVIE
1 2 3 4
Sound field
STANDARD SELECT EXTD SUR. DIRECT ST.
5 6 7 8
program
A SPEAKERS B NIGHT STRAIGHT
buttons
9 0 10
ENT.
EFFECT
PRESET/CH
LEVEL SET MENU
TITLE MENU
BAND SRCH MODE
ENTER
STEREO MUSIC ENTERTAIN MOVIE
1 2 3 4
STANDARD SELECT EXTD SUR. DIRECT ST.
5 6 7 8
SPEAKERS
A B NIGHT STRAIGHT
9 0 10 ENT.
EFFECT
DVD MD/CD-R TUNER CD
VOLUME
dB
L R
■ Enjoying multi-channel software
If you connected a surround back speaker, use this feature
to enjoy 6.1-channel playback for multi-channel sources
using the Dolby Pro Logic IIx, Dolby Digital EX or
DTS-ES decoders.
Press AMP on the remote control to select the
AMP mode, then press EXTD SUR. to switch
between 5.1 and 6.1-channel playback.
AMP
To select a decoder, press j / i repeatedly while
PLIIxMusic (etc.) is displayed.
PRESET/CH
ENTER
A-E/CAT.
Auto (AUTO)
When a signal (flag) that can be recognized by the unit is
input, the unit selects the optimum decoder for playing
back the signal in 6.1 channels.
If the unit cannot recognize the flag or no flag is present in
the input signal, it cannot automatically be played in 6.1
channels.
Decoders (select with j / i)
You can select from the following decoders depending on
the format of the software you are playing.
PLIIxMusic
For playing back Dolby Digital or DTS signals in 6.1
channels using the Pro Logic IIx music decoder.
EX/ES
For playing back Dolby Digital signals in 6.1 channels
using the Dolby Digital EX decoder.
DTS signals are played back in 6.1 channels using the
DTS-ES decoder.
EX
For playing back Dolby Digital or DTS signals in 6.1
channels using the Dolby Digital EX decoder.
Off (OFF)
Decoders are not used to create 6.1 channels.
PLAYBACK
EXTD SUR.
7
A-E/CAT.
29