Operating and maintenance MB_S21-050 instructions Page 2 of 17 Stainless steel swimming pool CONTENT GENERAL CHEMICAL RESISTANCE 2.1. technical room, filter room 2.2. Filled basin 2.3. Limit values 2.4. Note on water treatment 2.4.1. pH value correction 2.4.2. Flocculants 2.4.3.
Stainless steel swimming pool GENERAL You have made a far-sighted, economical and practical choice with our stainless steel swimming pool. The material stainless steel has proven itself over decades. It is the most resistant, durable and efficient material in the modern technology of bathroom construction.
Operating and maintenance MB_S21-050 instructions Page 4 of 17 Stainless steel swimming pool CHEMICAL RESISTANCE 2.1. technical room, filter room In case open filters or gushing water tanks are used in connection with stainless steel pools, the following must be observed: A common air space of open filters, open splash water tanks with the outside of the pool is to be avoided at all costs, as a concentration of chlorides contained in the atmosphere will cause lasting damage to the pool.
Page 5 of 17 Stainless steel swimming pool in Table 1 for compliance (pH value and free chlorine daily, chlorides every 3 weeks). This must be done with approved and calibrated measuring instruments or with the aid of a laboratory for water analysis.
MB_S21-050 instructions Page 6 of 17 Stainless steel swimming pool If this is not sufficient for reasons arising from ongoing operation, the fresh water addition must be increased to such an extent that the chloride limit values are complied with.
Operating and maintenance MB_S21-050 instructions Page 7 of 17 Stainless steel swimming pool CARE AND MAINTENANCE 3.1. corner discharge We recommend an annual emptying of all basins to remove deposits and possible corrosion (e.g. by overlooked coins etc.), as well as to check all screwed components under water.
Page 8 of 17 Stainless steel swimming pool Depending on the water depth, the tank emptying should be kept closed as long as possible during the cleaning process in order to dilute the washed chemicals on the one hand and to achieve an effective neutralisation on the other hand before the cleaning residues are added to the waste water.
Operating and maintenance MB_S21-050 instructions Page 9 of 17 Stainless steel swimming pool washed off with a high-pressure cleaner (max. 50 bar, water temperature max. 30°C). Chlorine bleaching lye or hydrochloric acid are generally prohibited for cleaning. 3.2.3. Equipment parts Plastic equipment shall be cleaned with neutral detergent (such as dishwashing detergent or similar) and scratch-free cloths.
Operating and maintenance MB_S21-050 instructions Page 10 of 17 Stainless steel swimming pool 3.2.4. Mechanical cleaning agents Must generally be free of ferrous components. Resources Suitable Unsuitable putty knives, scrapers, Tools are only allowed to be made of Tools made of low or...
Operating and maintenance MB_S21-050 instructions Page 11 of 17 Stainless steel swimming pool Water and/or High pressure cleaners, steam jet devices. steam jet Miscellaneous Natural leather (chamois leather), artificial leather, artificial fleece, sponges, sponge cloths. 3.2.5. Chemical cleaning agents Must be free of halogens (chloride and fluoride ions), i.e. they must not contain hydrochloric acid, hydrofluoric acid, sodium hypochlorite or calcium hypochlorite.
Operating and maintenance MB_S21-050 instructions Page 12 of 17 Stainless steel swimming pool Acidic cleaners Acid (e.g. phosphoric acid, nitric acid, Removes soiling such as amidosulfonic acid, citric acid, acid- limescale deposits, rust deposits, resistant surfactants, water, possibly grease-bound pigment dirt, light fragrances).
Page 12
MB_S21-050 instructions Page 13 of 17 Stainless steel swimming pool started in the late evening hours. Before filling the pool, please check all installation parts and in particular all safety precautions for their function and perfect fastening - loose screws/nuts must be tightened! Headlamps - Counter-current system ...
Operating and maintenance MB_S21-050 instructions Page 14 of 17 Stainless steel swimming pool 3.4. Pool cleaning during operation During the operation of the bath, the usual maintenance and cleaning work such as vacuuming the floor etc. should/must be carried out. If necessary, the pool edges, side walls and channel grates can be cleaned with soft stick brushes - while the filter system is running - immediately before backwashing.
Page 15 of 17 Stainless steel swimming pool Ice skating in stainless steel pools is not advisable, since on the one hand mechanical damage in the pool head area can be the result and on the other hand a continuous stability of the ice surface is not ensured due to the thermal conductivity of the pool walls.
Page 16 of 17 Stainless steel swimming pool Here, the electronics required for the lighting are usually tightly encapsulated with the housing. An exchange by the user is usually not intended. In case of failure or reduced light output, the headlamp shall be completely replaced or sent to the manufacturer for replacement of the defective electronic components.
Operating and maintenance MB_S21-050 instructions Page 17 of 17 Stainless steel swimming pool WARRANTY As already mentioned at the beginning, our warranty expires in case of non-compliance with these operating instructions. If there are any uncertainties on your part, please contact us immediately. We are at your disposal for further information and explanations at any time.
Need help?
Do you have a question about the Stainless steel swimming pool and is the answer not in the manual?
Questions and answers