Advertisement
OPERATION METHOD
HOSE CONNECTION
1) Insert hose connector into inlet mouth as pictured below,
and ensure that the connector is fastened tightly.
2) Press the connector button as picture shows and pull the
connector out when you want to pull hose
connector from this machine.
3) Insert hose connector into the blowing mouth, as picture
shows, when you want to use its blowing function.
4) Accessories can be connected
to unit as shown
OPERATION
1) Ensure that the unit is plugged into a power outlet.
2) Turn power switch to 'on' position.
'I' is the on position, 'O' is the off position.
3) Adjust the airflow using the sliding switch.
INSTRUCTION MANUAL • 5
Advertisement
